Can't set route for VPN


  1. glestwid
    Posts : 1
    Win7 x64
       New #1

    Can't set route for VPN


    Hi, I got the following issue. I connected to VPN server and got the following routes table:

    ===========================================================================
    Active Routes:
    Network Destination Netmask Gateway Interface Metric
    0.0.0.0 0.0.0.0 192.168.231.2 192.168.231.128 10
    10.9.3.96 255.255.255.252 10.9.3.98 10.9.3.98 30
    10.9.3.98 255.255.255.255 127.0.0.1 127.0.0.1 30
    10.255.255.255 255.255.255.255 10.9.3.98 10.9.3.98 30
    127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
    192.168.231.0 255.255.255.0 192.168.231.128 192.168.231.128 10
    192.168.231.128 255.255.255.255 127.0.0.1 127.0.0.1 10
    192.168.231.255 255.255.255.255 192.168.231.128 192.168.231.128 10
    224.0.0.0 240.0.0.0 10.9.3.98 10.9.3.98 30
    224.0.0.0 240.0.0.0 192.168.231.128 192.168.231.128 10
    255.255.255.255 255.255.255.255 10.9.3.98 5 1
    255.255.255.255 255.255.255.255 10.9.3.98 4 1
    255.255.255.255 255.255.255.255 10.9.3.98 10007 1
    255.255.255.255 255.255.255.255 10.9.3.98 10.9.3.98 1
    255.255.255.255 255.255.255.255 192.168.231.128 192.168.231.128 1
    Default Gateway: 192.168.231.2
    ===========================================================================
    With bold I emphasized the routes appeared after VPN connection's establishing. Now I need to redirect all traffic to the VPN connection I do it via the following commands:

    route delete 0.0.0.0 mask 0.0.0.0 192.168.231.2
    route add 0.0.0.0 mask 0.0.0.0 10.9.3.98 metric 8


    As a result I get the following table:

    ===========================================================================
    Active Routes:
    Network Destination Netmask Gateway Interface Metric
    0.0.0.0 0.0.0.0 10.9.3.98 10.9.3.98 8
    10.9.3.96 255.255.255.252 10.9.3.98 10.9.3.98 30
    10.9.3.98 255.255.255.255 127.0.0.1 127.0.0.1 30
    10.255.255.255 255.255.255.255 10.9.3.98 10.9.3.98 30
    127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
    192.168.231.0 255.255.255.0 192.168.231.128 192.168.231.128 10
    192.168.231.128 255.255.255.255 127.0.0.1 127.0.0.1 10
    192.168.231.255 255.255.255.255 192.168.231.128 192.168.231.128 10
    224.0.0.0 240.0.0.0 10.9.3.98 10.9.3.98 30
    224.0.0.0 240.0.0.0 192.168.231.128 192.168.231.128 10
    255.255.255.255 255.255.255.255 10.9.3.98 5 1
    255.255.255.255 255.255.255.255 10.9.3.98 4 1
    255.255.255.255 255.255.255.255 10.9.3.98 10007 1
    255.255.255.255 255.255.255.255 10.9.3.98 10.9.3.98 1
    255.255.255.255 255.255.255.255 192.168.231.128 192.168.231.128 1
    Default Gateway: 10.9.3.98
    ===========================================================================
    But I can't even PING any site or PC. How can I resolve this issue?
      My Computer
    Quote Quote

  3. samuria
    Posts : 3,788
    win 8 32 bit
       New #2

    You posted this in Windows 10 forum which has been answered
      My Computer
    Quote Quote

 

  Related Discussions
Where to route my 8 pin
in PC Custom Builds and Overclocking

Well heres the images currently its going across my motherboard and gpu any ideas where to route it? there seems to be no room at the back of my case to route a 8pin directy from the back to the socket P.S I know the h60 block is upside down there is a reson due to presure and the amd...
Is there a way to enable routing only specific ports via PPTP connection? So for example, Firefox would still be running on normal internet, while VNC would be working through PPTP.
Hi there i am looking for software the routes different websites to different network devices i have tethered my phone to my computer for Facebook at work, witch is blocked, and the work internet for everything else, how do i route Facebook to go through my phone and other stuff to go through...
route add
in Network & Sharing

Hello all. printer IP: 10.30.50.131 computer IP: 192.168.21.2 on same physical switch, not segmented or vlan'd. If I want to connect to the printer, shouldn't route add 10.30.50.131 192.168.21.2
Restore Point: Other Route ?
in Backup and Restore

Hello, This relates to a Post of a few days ago, but cannot find it to add this to it. I would like to resurrect a program and some files that I uninstalled and deleted about a month ago. Had bad experience with using a Restore point some time back, and guess I am reluctant to go that...
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 20:10.
Find Us