Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: My security cam system only has LAN and my home only has WIFI

22 Mar 2019   #31
kharl

widnows 7 professional 32 bits
 
 

Quote   Quote: Originally Posted by Digital Life View Post
You need to find out what router "A" IP is, Typically it will either be 192.168.0.1 or 192.168.1.1, It's your gateway router

You can find this with the command " ipconfig " and look for Default Gateway.

If you don't know how to open a command prompt this tutorial on Seven Forums should help.

Command Prompt


its suppose that the ip is the one i entered in the previous step, which is the same as the router A but with one aditional number, if 192.168.1.1, it would be 192.168.1.2.

i entered that number and it works for the log in but few seconds later then say can not connect




also, i con not find the option for the step 10


"Enable Wireless Bridging"


My System SpecsSystem Spec
.
22 Mar 2019   #32
Digital Life

Microsoft Windows 7 Ultimate 32-bit 7601
 
 

Sorry about that I missed the part about step 9 router B, Are you totally disconnected from router A while working on router B.


The only other things I can think of is that maybe when you pressed save in the previous step it did not actually save the settings for some reason, I would retry router B from the beginning again.


EDIT:
Try connecting to router with WiFi and then try to open 192.168.2.2 IP



If you cannot connect to router B again you may have to reset the router, usually there is a small hole at the back of the router and you press a buttun with a pin or a open paper clip.


similar to this

https://www.belkin.com/us/support-ar...ticleNum=10771
My System SpecsSystem Spec
22 Mar 2019   #33
kharl

widnows 7 professional 32 bits
 
 

Quote   Quote: Originally Posted by Digital Life View Post
Sorry about that I missed the part about step 9 router B, Are you totally disconnected from router A while working on router B.


The only other things I can think of is that maybe when you pressed save in the previous step it did not actually save the settings for some reason, I would retry router B from the beginning again.



i did several times


i think those steps ar enot for my router because there is no option for the bridge stuff
My System SpecsSystem Spec
.

22 Mar 2019   #34
Digital Life

Microsoft Windows 7 Ultimate 32-bit 7601
 
 

Quote   Quote: Originally Posted by kharl View Post
i did several times


i think those steps ar enot for my router because there is no option for the bridge stuff

I think that setting might not show up until after you set a static ip then turn off DHCP then restart, and reconnect.
My System SpecsSystem Spec
22 Mar 2019   #35
kharl

widnows 7 professional 32 bits
 
 

no, i am not getting that option, at least i dont know where it is, what you mean with static?


what is done in this step?
Step 7

Click "LAN Settings" from the main menu. Add one to router A's IP address and enter it as the IP address for router B. For example, type "192.168.2.2". Type the same subnet mask as router A, for example "255.255.255.0".


everything its getting to the dark side of network i hated for years xD i preffered to learn anything else but not dealing with networks and here i am
My System SpecsSystem Spec
22 Mar 2019   #36
johnhoh

Win7 pro x64
 
 

Page 26 of your user manual indicates the login for your router is 192.168.2.1. This plus other login info is on routerdefaults.org. I'm not caught up on the recent posts above, sorry if you already knew this

Default settings of the Belkin F5D7234-4
http://cache-www.belkin.com/support/...m01110-a_g.pdf
My System SpecsSystem Spec
22 Mar 2019   #37
kharl

widnows 7 professional 32 bits
 
 

Quote   Quote: Originally Posted by johnhoh View Post
Page 26 of your user manual indicates the login for your router is 192.168.2.1. This plus other login info is on routerdefaults.org. I'm not caught up on the recent posts above, sorry if you already knew this

Default settings of the Belkin F5D7234-4
http://cache-www.belkin.com/support/...m01110-a_g.pdf
dont worry,
that adddress was changed to the same of the router/modem A plus one number up.
My System SpecsSystem Spec
.
Reply

 My security cam system only has LAN and my home only has WIFI




Thread Tools




Similar help and support threads
Thread Forum
Need help setting up home wifi security.
So I finally decided to try and set up some security for our home wifi and I dont have the confidence to prod away at it without the risk of ending up doing something really bad... What Im looking to do: . Set up home wifi for 3 person use . Admin(me) not around to give out wifi access all...
Network & Sharing
Wifi over Powerline - security - e.g. Devolo dLAN 500 Mbps WiFi
I am considering using a powerline system to give me additional wifi cover, but I am unclear how the available wifi connection is protected. They make a great deal of encrypting the traffic over the power circuit, but no mention is made of protecting the wifi connection. Surely, the risk with...
Network & Sharing
Why use Wifi at home any more Devolo Mains LAN system
Hi there Got fast broadband and still using slow Wifi for computers / tablets. I've just installed one of those Devolo Mains LAN devices -- works an absolute treat - I get almost FULL lan speed on computers situated a long way from the Router - the device I'm using has 3 LAN port outputs --...
Hardware & Devices
Can only connect to home WIFI, possibly due to no system icon access?
Hi, About 3 weeks ago, I was using a public WIFI connection. *something* went wrong, my computer froze up, and ever since, my system icons have been disabled and I can only connect to my home WIFI connection - by going to the control panel and manually connecting. Since I no longer have my...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:33.
Twitter Facebook