Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Manually mapping a drobo as a network drive

10 Jan 2020   #1
Dogmanuk

Windows 7 Ultimate 64
 
 
Manually mapping a drobo as a network drive

Morning all,

Long time browser, this forum has helped me loads over the past. Hopefully someone can help me with my problem.

I have a Drobo B800fs (network attached storage device) which has worked perfectly for a number of years. A couple of days ago I deleted circa 50% of the information from it and now it has gotten annoyed and won't mount.

I have contacted Drobo support and they have advised that I can map the drive manually within Windows Explorer, this is where I get stuck.

I am not sure of the syntax which I type to map the drive. I know that it is connected to my network on the ip address 192.168.1.50 but I am unsure of what "/", the server name etc.. to type? It also has a user name and password enabled (which I obviously know) so I guess I need to type that in also.

If anybody can help I will be eternally grateful.

Thanks.


My System SpecsSystem Spec
.
10 Jan 2020   #2
samuria

win 8 32 bit
 
 

Welcome to the forum you should be able to connect via\\ 192.168.1.50 if there is a share add the share name is \\192.168.1.50\sharename it should ask for password etc
My System SpecsSystem Spec
Reply

 Manually mapping a drobo as a network drive




Thread Tools




Similar help and support threads
Thread Forum
help accessing & mapping network drive without VPN
Hey, my employers IT support department has emailed me a certificate which allows me to access my office pc desktop using RDC without the need to establish a VPN to the server. My question is - can I now someone map one of the shared drives that is on the main office service again without the...
Network & Sharing
Mapping Network Shared External Drive
We have a company drive that we map folders from to certain computers. They reconnected at log in like normal. However, we have a separate external drive that when I map a folder from it, it never reconnects on log in. I have set the folder permissions for the user I want. I have tried directly...
Network & Sharing
Mapping a network drive
Ok. I mapped my college snap server on windows 7 professional. I just upgraded to windows 7 ultimate, so I know what I need to change. I went into local security policy, and changed Network Security: LAN Manager Authentication Level to Send LM & NTLM Responses. I go to map it, and I get the...
Network & Sharing
Mapping a network drive
Hi there, it seems Microsoft has changed how to map a network. I can map a network drive fine in Vista but not in 7. It always connects as my current user, assistance would be great. \\irsserver\yourusername$\
Network & Sharing
Mapping a network drive problem.
This makes no sense. I have always had 2 cpu's on a network. My main rig, and a "server". (Basically a storage and backup cpu). Well I just built a new rig, and installed Win 7 RC. Re formatted my old "main" rig to become my new "server". I still had the old "server" (Win XP) connected to the...
Network & Sharing


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 08:06.
Twitter Facebook