Difficult internet access

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 137
    Windows 7 Pro 64bit
    Thread Starter
       #11

    I just noticed a pop up. It said Bitdefender update has failed. Clearly nothing is getting access to the internet today.
      My Computer


  2. Posts : 7,351
    Windows 7 HP 64
       #12

    Open Control Panel\All Control Panel Items\Network and Sharing Center
    You should see something as bellow:
    Is your router set as Home Network?
    Attached Thumbnails Attached Thumbnails Difficult internet access-wifi.jpg  
      My Computers


  3. Posts : 3,786
    win 8 32 bit
       #13

    50% is low and will get drops or Terry's you need 79+ ideally so with phone stand by router should be 100% then move towards PCs were does it drop is there a wall, TV,power cable were it drops that's doing it?. It may be a pain but one next to router does it work there ok if so it proves PC is fine something is blocking signal
      My Computer


  4. Posts : 7,351
    Windows 7 HP 64
       #14

    Samuria, I agree that the signal is weak but one computer work and the other, just on the side, doesn't. It's something else.
      My Computers


  5. Posts : 3,786
    win 8 32 bit
       #15

    That's why it needs to close to router as a test if it's ok it's signal if it's still had we have illuminated signal and then need to try other things
      My Computer


  6. Posts : 137
    Windows 7 Pro 64bit
    Thread Starter
       #16

    Megahertz07 said:
    Open Control Panel\All Control Panel Items\Network and Sharing Center
    You should see something as bellow:
    Is your router set as Home Network?
    Yes, as in the image my router is shown as Home network.
      My Computer


  7. Posts : 31,249
    Windows 11 Pro x64 [Latest Release and Release Preview]
       #17

    One thing to add, one of the main causes of WiFi comms issue is the common or garden Cordless phone ...

    The standard frequency used for cordless phones is 2.4GHz worldwide, the UK actually regulates for this to have UK phone systems use 1.88-1.9GHz, specifically to prevent interference with 2.4GHz WiFi.

    With the worldwide technology business that we see with the likes of Amazon & Ebay, it is not unknown for a DECT Phone designed to run on 2.4GHz to find it's way onto the UK market, (a change of the connecting lead to the phone line and Mains is easy to do as both are usually replaceable by design), and cause issues for a WiFi Router placed close to the Phone Base station

    It's often the case that a phone and WiFi Router end up on the same side table or shelf, worth checking if the phone is too close to the Router and if it is set to use 2.4 GHz (some are universal and have a switching mechanism for frequency).

    May be nothing, but worth a check
      My Computers


  8. Posts : 137
    Windows 7 Pro 64bit
    Thread Starter
       #18

    UPDATE:
    I have 4 bars up on the little desktop indicator and it seems to connect to the internet OK this morning. Anti V and two browsers have updated normally and I can get to websites but they are loading a little slowly. Chrome browser tries to update and fails or gets halfway through and sticks. Opera and Firefox are fine.

    I tried the little phone app again. The readings are the same as in post #6 and right next to the router it reads -28db. The numbers slowly increase as I walk away and go into the next room toward the PCs.
      My Computer


  9. Posts : 31,249
    Windows 11 Pro x64 [Latest Release and Release Preview]
       #19

    The DB reading is the interference figure, (losses), so lower is better Ideally you should look for a figure between 65 and 67 DB for a usable signal

    Why is almost everything negative in Wi... - Cisco Community
      My Computers


  10. Posts : 137
    Windows 7 Pro 64bit
    Thread Starter
       #20

    Barman58 said:
    One thing to add, one of the main causes of WiFi comms issue is the common or garden Cordless phone ...

    The standard frequency used for cordless phones is 2.4GHz worldwide, the UK actually regulates for this to have UK phone systems use 1.88-1.9GHz, specifically to prevent interference with 2.4GHz WiFi.

    With the worldwide technology business that we see with the likes of Amazon & Ebay, it is not unknown for a DECT Phone designed to run on 2.4GHz to find it's way onto the UK market, (a change of the connecting lead to the phone line and Mains is easy to do as both are usually replaceable by design), and cause issues for a WiFi Router placed close to the Phone Base station

    It's often the case that a phone and WiFi Router end up on the same side table or shelf, worth checking if the phone is too close to the Router and if it is set to use 2.4 GHz (some are universal and have a switching mechanism for frequency).

    May be nothing, but worth a check
    OK and thanks for the input. My router and cordless phone base unit are side by side on the only convenient surface near the incoming phone line socket. Here's what we've got. The router as supplied by Orange (France) is made by Sagem, called the Livebox Play. The phone is a BT8600 call blocker, purchased on ebay (UK). If interference is a possible issue it will be difficult but not impossible to separate them.
      My Computer


 
Page 2 of 3 FirstFirst 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 20:43.
Find Us