Has anyone successfully installed Wifi 6 (802.11ax) drivers for W7?

Did you install the sha2 update as advised on that thread?

If that doesn't work, then you need to ask over there.

I am doing a build with an ITX MB to save my win 7 HDD's and retain my Auto cad use. The new board is lga1155 ddr3. It also has 2 NVME slots 2230 WiFi and the HDD on top. My software load is original win 7 pro Not a modified. I know if I want the nvme hardware to work as boot I will need to do a modified windows install.
My question is about the M.2 WiFi .Is there a card you can suggest that will work with win 7 without doing so.
This board will also give me a multi boot option by loading win 10 on the NVME If I did so the wifi card ? I would like to work on ether one.
I have read about the issue that wifi 6an 6e works only with win 10 or 11
So yes I could just solve by booting to 10 for internet access. I just would like to do it from ether.

@pjlucky

The new board is lga1155 ddr3. It also has 2 NVME slots 2230 WiFi and the HDD on top.

Interesting motherboard. Do you have a link to it? The original 1155 mobos didnt have nvme slots. I used pcie>nvme adapters on my 1155 motherboard.

booting nvme disk via pcie adapter on older machines

I bought this from amazon.

Why?

Thanks for the reply. It is interesting and odd. I dont know how they are getting hold of those h61 chipsets I guess they must be pulling them off old boards.

It doesnt look as if it has usb3 or sata 3 unless I missed it . It has a strange combination of features.

You asked Why . Well My first post says why I wanted to retain the use of Autocad 2000 that will run only in the XP environment. I tried to bring that to an NVme drive ,But could not load Xp into the modified Win 7 NVme install.
A modern system will have driver issues of one sort or another trying to use the Xp on any thing newer.
The Xp environment works on this new board. and as long as I stay with the SSD drive It will.
I can load an NVme drive and have a dual system . But that is just not necessary,since I have all that in the new case right under this new case. I just have to swap key boards and move a few things.

It was all just a challenge anyway to make something. I paid $ 120 bucks for a board and case, to setup and reuse my LGA 1155 i7 2nd gen and DDR 3 Ram

Update a note I stated that the board has a USB 3 header and it is printed USB3 on the board as well The Sata ports are printed on the MB as sata 3 and oddly sata 4
This make it uncertain what is misprinted, the online sales description or the MB.
- - - Updated - - -

Re reading your post I see mention of usb 3 and sata 3 It actually does. Though the literature does not say so. The board itself is labeled to have sata 3 and there is a USB3 connector at the rear edge next to the HDaudio .
I researched many boards none have all the newer things we want this has. It is to bad that there is no support.
If you asked why from Amazon well Newegg didnt have anything close and I was surprised when I found it on Amazon ,2 day delivery no less

- - - Updated - - -

For the board mentioned above. I have solved the Ethernet driver issue. It is a Realtech PCie FE Family control. Anyway that is what Device manager says. For me it is still a mystery because I dont know how windows loaded it from my resources. I had DL to intel driver files to a flash dr. and yesterday the first one did not resolve.Today I did not even unzip the new one. And windows had loaded the one at boot. (this is from an SSD HDD )

So problem partly solved the RJ47 cable port is working. Next will a NVme updated win7 install and work with every thing ? Including the main question in this thread will a M.2 WiFi 802.11 with BT work from the NVme install?

Next will a NVme updated win7 install and work with every thing ?

Depends what that means.

You could use this to update win7 installation media.
Update your Win 7 installation media


*************************************************************************************************

The gigabyte b75 board I linked earler supports xp. With the gigabyte bios update dated 2018 it also supports nvme boot with any cheap pcie>nvme adapter

The z77 also support xp and with a bios update can run boot nvme from the pcie slots and there are a lot more of them than on the b75.

for example:

1 x PCI Express x16 slot, running at x16 (PCIEX16)
1 x PCI Express x16 slot, running at x8 (PCIEX8)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
1 x PCI slot

If you want xp and nvme and usb3, then a z77 board makes much more sense.

have solved the Ethernet driver issue. It is a Realtech PCie FE Family control.

Win7_7142_12222021 is the same driver that is already included in my updater.