Enable wireless adapter

Page 1 of 2 12 LastLast

  1. Posts : 26
    Windows 7 64 Ultimate
       #1

    Enable wireless adapter


    Hi all,

    normally I would not bother you with such a silly question but I just canīt solve the issue.
    I run W7 ultimate 64bit on a brand new customized machine. Not an upgrade but a clean Installation
    The problem I have is the following:
    I upgraded to wireless with D-Link DWA552. I have a Linksys router WRT54G.
    Installation and driver upgrade went fine. PCI card is correct in device manager en enabled.
    The issue I have is that I cannot enable the wireless adapter.
    Ok next step: got another card. Linksys, the a Belkin, the a noname.
    Always the same issue. Microsoft compatibility center says YES to 64 bit. Installation is easy as it should be but the wireless adapter stays disabled whatever I do.
    I also restartet WLAN Service, I disabled/enabled the hardware.
    I appreciate every Info/Tip.
    btw I did countless wireless installation.
    Am I missing something?
    Thanks so much
      My Computer


  2. aem
    Posts : 2,698
    Windows 7 Ultimate 64Bit
       #2

    I assume you have checked that you have installed the driver and it's working properly as noted from Device Manager. I also assume you have enabled the device in BIOS (if applicable).

    What machine do you have?

    Just the other day i have had issue turning on bluetooth device on one of our laptops. It turns out i needed the hotkey driver. Installed it and turned on BT via Fn + F5 and all seems to come online.
      My Computer


  3. Posts : 26
    Windows 7 64 Ultimate
    Thread Starter
       #3

    I assume you have checked that you have installed the driver and it's working properly as noted from Device Manager. I also assume you have enabled the device in BIOS (if applicable).
    Your assumptios are right. Everything is fine here.

    What machine do you have?
    It's a INTELP55 Mainboard, Intel I7 860 processor, 4x2GB Kingston, 80GB Intel SSD Ver.2, 2x 1TB WD Black edition.

    Any other ideas?
    Thanks
      My Computer


  4. Posts : 8,870
    Windows 7 Ult, Windows 8.1 Pro,
       #4

    There is a new Windows 7 driver for your D-link wireless adaptor dated 11/05/09 which might help.

    Click where it says "United States" then click "drivers". It also lists a fix for the problem you described.

    ....Ī Supports Win7 OS.
    Ī Fixed: Wizard scan would be empty on utility's first run.

    D-Link Xtreme N Desktop Adapter
      My Computer


  5. Posts : 26
    Windows 7 64 Ultimate
    Thread Starter
       #5

    @chev65: Thanks but this is the driver I used
    @ aem: Yes your assumptions are correct. This is the machine I have:
    Inter P55 mainboard, I7 860 Processor, 8GB (4x2) Kingston, ATI Radeon HD 4770, Intel SSD V2 80GB, 2x WD 1TB Black edition, LiteOn Multi Burner, BlueRay Drive, Windows 7 Ultimate 64bit
    Any other ideas?
      My Computer


  6. Posts : 6
    windows 7 32bit
       #6

    I think I may have a solution for you. i went through the same thing and found the answer on a forum. I got a new wireless card and i couldn't enable it either what i found to be the problem was my anti-virus. Yes i had kaspersky IS installed. disabling kaspersky didn't help i had to completely remove it from my computer and upon reboot my wireless was enabled again.. I learned it from some guy who was having the same problem with zone alarm anti-virus installed on his computer. So completely remove what ever anti-virus you have and reboot your computer and see if it enables itself.
      My Computer


  7. Posts : 26
    Windows 7 64 Ultimate
    Thread Starter
       #7

    Well I have Kaspersky Internet Security 9.
    After removing it it works.
    Hey, you are the man. Thanks so much.
      My Computer


  8. Posts : 6
    windows 7 32bit
       #8

    Not a Problem I'm happy to help... I went through all the same crap you did until i read the forums.. I also read someone else having the same issue and he said it was fixed after he reinstalled windows.. I wasn't going to go through that again so i kept looking.. Finally I came across that post and I tried removing kaspersky completely and it worked. I still don't understand the reason why it affects the wireless card like that.. I still haven't put back on kaspersky but what i did learn about it was you need to install your wireless card first then the anti-virus. And if you ever uninstall the wireless card for some reason it doesn't matter what wireless card you use it won't work until the anti-virus is removed.. I really wish i knew the reason behind it for i like kaspersky.
      My Computer


  9. Posts : 26
    Windows 7 64 Ultimate
    Thread Starter
       #9

    Thanks again. I'll try to get an axplanation from Kaspersky and will post it here.
      My Computer


  10. Posts : 3
    Windows 7
       #10

    Kaspersky & wireless adapters


    I had the same problem and it turned out to be a Network Filter that Kaspersky Internet security attaches to the wireless adapter. You can enable the wireless adapter and keep your Kaspersky anti virus software running if you remove just the Kaspersky Filter.
    To do this go to the Network & Sharing Centre, then click on "Change adapter settings". Right click on the adapter that is causing the problems and choose "Properties". Remove the tick from the box next to the Kaspersky NDIS filter.
    The adapter can now be enabled and used. It may require you to go through the diagnose connection problem once to reset the adapter once the filter has been removed.
      My Computer


 
Page 1 of 2 12 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Đ Designer Media Ltd
All times are GMT -5. The time now is 23:02.
Find Us