New
#11
Okay... I know..
If you are pulling internet from a usb device... either you are picking it up free (i persume)
So you are going to have to make your MAIN computer the gateway.. the one pulling in the internt.
If i am not mistaking and the wa you want it...
You want to give all the computers internet and also put your computer and the rest on the network.
This is what you do...your only going to use the LAN ports on your router. You can turn off NAT and Wireless.. becuase the NAT will come from your REMOTE computer.
REMOTE COMPUTER:
WIRELESS ADAPTER... INTERNET COMING IN
START THE ICS ON IT, IN SETTINGS MAKE SURE THAT IT IS POINTING TO AN ENABLED NIC CARD
ON THE OTHER NIC ON THE REMOTE COMPUTER YOU ARE GOING TO MAKE SURE THAT THE IPS SAY:
192.168.0.1
THAT IS IT FOR THE REMOTE
PLUG THE CAT 5 CABLE INTO THE LAN 1 OF THE ROUTER.
------------------------------------------------------------
SECOND COMPUTER (WORKSTATION)
PLUG CAT5 CABLE IN LAN 2
CHANGE THE IPS.. IN THE IPv4
IP: 192.168.0.2
SUBNET: 255.255.255.0
GATEWAY: 192.168.0.1
MAKE SURE YOU PULL THE DNS NUMBERS FROM YOUR INTERNET AND FORCE THEM IN OR THE WEBPAGES WON'T PULL UP... INTRANET WILL WORK THOUGH :)