New
#41
Thanks for the reply but to be honest I was more interested on how to get the Jumbo Frames option as I want to turn them on but don't have the setting under my L1 nic.
Thanks
Thanks for the reply but to be honest I was more interested on how to get the Jumbo Frames option as I want to turn them on but don't have the setting under my L1 nic.
Thanks
It was not a reply to your post.
Re your post though - it's a driver thing. If the option is not there, then it's not there.
hi i have MD gigabyte with atheros AR8151. my hp router gives me limited connection sometimes.
where I can find an updated version.
thanks.
The get the nic card working in windows 7 32/64. uninstall the atheros L1 card driver that windows defaulted and install the 32 or 64 bit vista driver on the Asus disk. Right click the setup file in the x86 x64 folder and run compatibility mode with windows XP service pack 3 . and its done works great no issues
atheros L1 ethernet adapter in Win7 x64
No of Recieve Bubbers - 2048 No of Transmit Buffers - 1024
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-BFC1-08002BE10318}\0007
and *TransmitBuffers = 512 type - 1024
and look
and so is the rest of the parameters
drivers Atheros http://www.atheros.cz/
Did it solved the problem with this modification:
No of Recieve Bubbers - 2048
No of Transmit Buffers - 1024
I think we are better of installing an PCI-E Gigabit Ethernet card, they are realy cheap now, but the question is what chipset is best and recommended for Windows 7 x64 ?
yes Windows 7 64bit
look http://www.adaptec.com/en-us/products/
I have some questions about my lan card qualcomm atheros ar8161/8665 pci e gigabit ethernet controller ndis 6:20 in my asus laptop N56V series that will operate as a server
the questions are about what it is and what effect it has on my server.
Question 1 What is max irq per second is the standart 5000 it can be set to 30000.
Question 2 Arp offload I can turn it on or off?
Question 3 ECMA I can turn on or off?
Question 4 interrupt moderation I can turn on or off?
Question 5 jumbo frame I can to 9 kb mtu mtu set of 2 kb or off?
Question 6 Ns offload I can turn on or off?
Question 7 Vlan ID value 0 I can introduce him another value?
Question 8 wake on magic packet I can turn it on or off?
Question 9 on wake pattem match I can turn it on or off?
Question 10 Large Send Offload (IPv4) I can turn it on or off?
Question 11 Large Send Offload v2 (IPv4) I can turn it on or off?
Question 12 Large Send Offload v2 (IPv6) I can turn it on or off?
there are more of these institutions but the rest I know
How can I best set for my Home Game Server.
so that the latency improves.
I want to limit the lagg as much as possible.
my internet speed is 150 Mbit download.
my upload speed is 15 MBIT upload.
I use CAT 6 cables lan.
I also have a sitecom switch that can handle up to 1GB between the modem and the server laptop.
internal RAM memory of my laptop is 8GB
Core i7 processor
hard disk is changing there is an SSD hard drive at 120GB.
I have windows server 2008 R2 enterprise.
sincerely senol