Need Router help

While waiting for a reply I saw this .. on choosing a password for this location..Utilities> System Settings below.
Administrator Password
The Router ships with NO password entered. If you wish to add a password for more security, you can set a password here. Keep your password in a safe place, as you will need this password if you need to log into the router in the future. It is also recommended that you set a password if you plan to use the Remote management feature of this Router.

The login timeout option allows you to set the period of time that you can be logged into the Router's advanced setup interface. The timer starts when there has been no activity. For example, you have made some changes in the advanced setup interface, then left your computer alone without clicking "Logout". Assuming the timeout is set to 10 minutes, then 10 minutes after you leave, the login session will expire. You will have to login to the router again to make any more changes. The login timeout option is for security purposes and the default is set to 10 minutes. As a note, only one computer can be logged into the Router's advanced setup interface at one time.

Mine doesn't look like that..
I used to have that red top house..
In the 1st place on the left I see the OLD.. Georgia-Pc icon...
looks like a pc ..
to the right of the icon... is a LINE with a RED X sitting on the top..
to the right of the red X the line continues.. to what looks like grayed out .. Internet Icon

I looked around while waiting your reply.. on my network map it tells me the adapter is NOT connected.

iseeuu said:

When looking at your "Network and Sharing Center", what does it say where the arrow is pointing?



Cheers!
Robert

Where your PC shows on the far left .. that's where I see GEORGIA_PC
where YOUR red top house is .. that's where the RED X is showing.ontop of that line toward the internet Icon.on my screen .

There is nothing on my screen where your BIG red arrow is...

iseeuu said:

OK ... do you see the "Manage Wireless Networks" to the left of what we are looking at now? If so click on that, then right click on the wireless network and select "Properties" and find the "Security Tab". I have two screen shots above for you to look at.

See if you can make sure the "Security Tab" is set to WPA2-Personal.

Robert

YES I have found what you ask for ... Top of the screen I see
:GEORGIA-PC NETWORK Wireless Properities on connections Name is the same
SSID is the same
Network type: Access point
Network availibility : All users

There is a ck mark in the top Sentence: Connect automatically when the network is in range.
next tab.

Security tab:

Security type : WPA-Personal
Encryption : AES
Network Security key: 187022652 #'s by the tech guy at Belkin.

iseeuu said:

OK ... do you see the "Manage Wireless Networks" to the left of what we are looking at now?
YES this was found by me
If so click on that, then right click on the wireless network and select "Properties" and find the "Security Tab".
YES found the security tab..
I have two screen shots above for you to look at.

See if you can make sure the "Security Tab" is set to WPA2-Personal.
YES

Robert

SEE above in RED ink

I need to stop working now it's getting late.. I'm quite tired now.

I also saw an Advanced settings tab on the Wireless Network Properties box at the bottom..
I click on Advance Setting tab...
Shows..802.11 settings
NO tic/check in Enable Federal Info. Processing Standards( FIPS)
compliance for this network

Robert NONE of the screenshots showed or would OPEN in the message I received on those links.

iseeuu said:

Here are some screen shots that apply to the laptop: