Is there a way to see another subnet?


  1. Posts : 19
    W7
       #1

    Is there a way to see another subnet?


    I'm away from home for a few months and Internet access is provied by a router in the 192.168.x.x range, so my pc has an address on this subnet. But, I have a device with an address in the 10.0.0.x range that I need occasional access to, and the only way I know how to do that is to keep changing my IP address around from one subnet to the other.

    Is there an easier way to 'see' the 10.0.0.x device when my IP address is on the 192.168.x.x subnet?
      My Computer


  2. Posts : 7,878
    Windows 7 Ultimate x64
       #2

    ezhik said:
    I'm away from home for a few months and Internet access is provied by a router in the 192.168.x.x range, so my pc has an address on this subnet. But, I have a device with an address in the 10.0.0.x range that I need occasional access to, and the only way I know how to do that is to keep changing my IP address around from one subnet to the other.

    Is there an easier way to 'see' the 10.0.0.x device when my IP address is on the 192.168.x.x subnet?

    You would need a router that could route traffic between the 2 subnets. If this is simply a SOHO style router, you won't have the functionality.
      My Computer


  3. Posts : 19
    W7
    Thread Starter
       #3

    OK, thank you. I suspected something more than normal home kit would be needed.
      My Computer


  4. Posts : 2,737
    Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
       #4

    @ezhik;

    You can bind two IP addresses to your NIC if you can do without DHCP. Turn off DHCP and go to Advanced TCP/IP Setting in IPv4. In there you can put a 192.168.0.0/16 address and the gateway address (Subnet Mask). Then add another address 10.0.0.0/24 and no gateway address (Subnet Mask). This way you can be on both networks at the same time.
    Attached Thumbnails Attached Thumbnails Is there a way to see another subnet?-advancedtcpipsettings.jpg  
    Last edited by WindowsStar; 14 May 2010 at 00:31.
      My Computer


  5. Posts : 1,325
    Windows7 Ultimate 64bit
       #5

    Aarrghhh... I'm 16 minutes too late...

    Yeah, bind a second IP address (meaning you'd have to use manual IP address).
    Or you can buy a "real" router to "simplify" things... I personally use Mikrotik RB450G routerboard, it's the cheapest closest thing to my old Cisco 2000 series router...

    zzz2496

    Ps. here's the site for Mikrotik hardware - buy a board, and a case, and you have your self a super flexible router...
      My Computer


  6. Posts : 19
    W7
    Thread Starter
       #6

    WindowsStar said:
    @ezhik;

    You can bind two IP addresses to your NIC if you can do without DHCP. Turn off DHCP and go to Advanced TCP/IP Setting in IPv4. In there you can put a 192.168.0.0/16 address and the gateway address (Subnet Mask). Then add another address 10.0.0.0/24 and no gateway address (Subnet Mask). This way you can be on both networks at the same time.
    Fantastic. Thank you, it works, and I'm really pleased to have got this going. Added some rep. Many thanks.
      My Computer


  7. Posts : 2,737
    Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
       #7

    Glad that worked and we could help.
      My Computer


  8. Posts : 19
    W7
    Thread Starter
       #8

    zzz2496 said:
    Aarrghhh... I'm 16 minutes too late...

    Yeah, bind a second IP address (meaning you'd have to use manual IP address).
    Or you can buy a "real" router to "simplify" things... I personally use Mikrotik RB450G routerboard, it's the cheapest closest thing to my old Cisco 2000 series router...

    zzz2496

    Ps. here's the site for Mikrotik hardware - buy a board, and a case, and you have your self a super flexible router...
    Thak you for the advice too. I'm away from home for a few months and having to use a set-up that is already in place, and not for me to tinker with too much, and not for me to begin replacing equipment, however nice and flexible it would be.

    The work around works spot on, the two subnets are 'binded', and I don't need to keep messing around changing ip address's anymore.

    Tips much appreciated.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:00.
Find Us