I don't know if you have your network set for this, but most VNC servers allow access over the web on port 5800/5900 of the VNC machine. I have done this with TightVNC, but not using a mobile phone.
TightVNC Frequently Asked Questions
So you would do this from within a web browser.
Good news,
I just heard back from Brink our helpful Admin and I'm able to post the patch here for you. So here is how to enable Remote Desktop on Windows 7 Home Premium.
For the record Brink says "As long as it's not altering anything with the activation process of Windows 7, it will be fine".... so we're fine.
I haven't tried the patch; so please let me know if it's a complete, or partial workaround and any problems that you find with it.
Good Luck.
Timo
EDIT: TIP - Remember to open port 3389 on your firewall and router/modem's.
My advice here would be to pick a random number for the external port and port-forward this to 3389 internally (this is slightly safer and at least stops malicious bots that scan for open port 3389.). Note: Just make sure that the number is not a port that another useful service uses.... google your port-choice first to see.
E.g. If you forward port 54321 to 3389 and where connecting to ipaddress 222.111.222.111 then for your Remote Desktop Connection you'd type in 222.111.222.111:54321. Hope this helps.
Tim you are the freaking man! With a title so simple i can't believe i couldn't find that on my own. As of now she seems to be running smoothly. I can connect through from my windows mobile device locally with easy. However, it requires me to turn off my firewall and i can't find the program in the exception menu so unless i find that I wont be able to leave my firewall off. Semi off topic question do i still have to port farward if i where to connect through remote desktop without a local IP address (IE ones that not 192.168.X.XXX?)
I think i have the worlds smallest resolution view of windows 7 :)
picture1 = remote desktop w/out full screen
picture2 = is my omnia i910 homescreen :)
picture3 = landscape view w/ full screen remote desktop
Wow that is the worlds smallest view of windows though probably not the worlds biggest window.Glad I could come through for you.
Turning the firewall off is bad. Lets work on that. You have to port forward your router so that your router knows the target PC. How you configure it will depend on if it's just for internal use or if you want to connect from outside.
EG. My Windows Mobile Device (WMD) has the internal ipaddress of 192.168.1.10, I have one router that is also a modem. It has the internal address of 192.168.1.1 adn an external WAN address of 211.111.211.111. I want to connect to my windows 7 machine with the ipaddress of 192.168.1.20.
To do this:
INTERNALLY
On the windows 7 machine
- In system properties - Allow Connections from computers running any version of windows
- Poke a hole in your firewall for port 3389
- Ensure that network discovery is turned on
On the Router
- Most modern home routers will be ok with no changes as they will detect a Remote Desktop Connection attempt and open the port. Older routers may require you to configure port 3389 to be open (this is very unlikely).
On the WMD
- Install a Remote Desktop Client
- Run it and type in 192.168.1.20
- Wait while it connects
- Type in the credials when asked and connect
EXTERNALLY
If I take my WMD to work and want to connect, I need to make it as secure as possible. There are more secure ways like creating a VPN tunnel first however here's what we can do if we just use Remote Desktop Protocol (RDP) and make it as secure as possible.
On the windows 7 machine
- In system properties - Allow Connections from computers running any version of windows
- Poke a hole in your firewall for port 3389
- Ensure that network discovery is turned on
On the Router
- Pick a spare port that's not in use e.g. 54321
- Open your router and find port forwarding (sometimes it's under NAT, your router configuration will vary slightly to the below steps)
- Create a Application name such as RDP so that you remember why you forwarded that port
- Set the start port to 54321
- Set the End Port to 3389
- Set the IPaddress to be the Windows 7 box 192.168.1.20
- Tick Enable (if the option exists)
On the WMD
- Install a Remote Desktop Client
- Run it and type in 192.168.1.20:54321
- Wait while it connects
- Type in the credials when asked and connect
Does this answer all of your questions? :)
PS: EDIT
TIP: I would recommend a password of more than 12 digits, that you disable the administrator account, and update all antivirus software this will increase security a lot more.
Quote