Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: FTP Setup and Access

06 Jul 2010   #11
WileyDog

Windows 7 Professional
 
 

I have a static IP: 69.224.38.12


My System SpecsSystem Spec
.
06 Jul 2010   #12
WindowsStar

Windows 7 Enterprise (x64); Windows Server 2008 R2 (x64)
 
 

Quote   Quote: Originally Posted by WileyDog View Post
I have a static IP: 69.224.38.12
Ok that is good. Now access your router or firewall and add a route from 69.224.38.12 to your internal IP for your FTP server. Make sure you include the FTP protocol. Then you should be able to access your FTP via the 69.224. 38.12 address.
My System SpecsSystem Spec
07 Jul 2010   #13
Adrian

 
How to Set up FTP on Windows 7

A fantastic post from Set Prince on how to set up FTP service on your computer!
Read the following: FTP Server - Set Up on Your Computer

Great step by step.
My System SpecsSystem Spec
.

07 Jul 2010   #14
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by Adrian View Post
A fantastic post from Set Prince on how to set up FTP service on your computer!
Read the following: FTP Server - Set Up on Your Computer

Great step by step.
Adrian!

Already done post #5 (permanent link)...

The main probs now is to set his static IP to the router.
My System SpecsSystem Spec
07 Jul 2010   #15
Adrian

 

Quote   Quote: Originally Posted by WileyDog View Post
I have set up an FTP site, and named it, but did not use a virtual host name. In "Basic Settings", when I "Test Connections", I get "The server is configured to use pass-through authentication with a built-in account to access the specified physical path. However, IIS Manager cannot verify whether the built-in account has access. Make sure that the application pool identity has Read access to the physical path. If this server is joined to a domain, and the application pool identity is NetworkService or LocalSystem, verify that <domain>\<computer_name>$ has Read access to the physical path. Then test these settings again."

I am doing this so a friend in Sweden can upload a 20gb file to my system.

Any help here would be greatly appreciated.
Linksys/Cisco Support, how to set up an IP address: Setting-Up a Router with a Static IP Account
My System SpecsSystem Spec
Reply

 FTP Setup and Access




Thread Tools




Similar help and support threads
Thread Forum
Wi-Fi Protected Setup now supports NFC for tap-to-connect access
Read more at: Wi-Fi Protected Setup now supports NFC for tap-to-connect access to work, home networks | ZDNet See also: Wi-Fi CERTIFIED Wi-Fi Protected Setup? adds NFC tap-to-connect for simple set up of security-protected Wi-Fi® devices and networks | Wi-Fi Alliance
News
Network Storage Device Setup and Access problems
I have a Cisco/Linksis E4200 Router. It has both wired and wireless access. I have an external storage device attached that will not allow me to create new folders. The device is a 2TB Hard Drive in a Rosewill enclosure connected to the router by USB 2.0. I had to connect directly to the computer...
Network & Sharing
Windows 7 pro cannot access router setup
I have just received a new window 7 pro computer. I have a net gear 3400 router. When i run the setup cd it tells me router is unresponsive. I put in 192.168.1.1. In URL it hangs I can access some sites except www.microsoft. com and Allentown, Lehigh Valley news from The Morning Call and mcall.com...
Network & Sharing
Setup execution fails with Access Denied error
I have four partitions on my hard drive, viz., C, E, F and G. Partitions C and G are NTFS whereas E and F are FAT32. I downloaded wxRuby Setup to the partition E. When I tried to execute the Setup, Windows 7 displayed an error: "Unable to execute file in the temporary directory. Setup aborted....
Software
How do I access my main monitor if broken in a multi-monitor setup?
I have a setup with 6 monitors. Today my main monitor broke and I couldn't find a way to shut the PC down since I couldn't access the main desktop to get to the Start menu. Is there a way to change which monitor is the main monitor without having access to the current main monitor?
General Discussion
Access Windows 7 KMS Client Setup Keys
Source
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:01.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App