Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Microsoft confirms Windows 7 SP1 RTM, released to OEMs today

23 Jan 2011   #311
HammerHead

win 7 X64 Ultimate SP1
 
 
RC

I have done three rigs. I must be using the RC version. I just got two updates via MS update for the RC.

The cleanup routine has given me back 1.9 Gig on all three rigs.

Just Noticed I have a watermark (lower left desktop). "Windows 7 Evaluation Copy Build 7601"
I have good BkUps. What should I do? Sit tight?


My System SpecsSystem Spec
.
23 Jan 2011   #312
wds7

WDS 7 Home Pre.x64
 
 

Quote   Quote: Originally Posted by tw33k View Post
Prior to SP1 every time my PC came out of sleep mode my external USB 3.0 drive would disconnect and reconnect. It doesn't happen any more

Finally .....MS really fixed this ....?
Mine keeps rebooting if i have Ext.HDD plugged in .....though ...
hopefully this will be fixed too ....
My System SpecsSystem Spec
23 Jan 2011   #313
mikedl

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by HammerHead View Post
I have done three rigs. I must be using the RC version. I just got two updates via MS update for the RC.

The cleanup routine has given me back 1.9 Gig on all three rigs.

Just Noticed I have a watermark (lower left desktop). "Windows 7 Evaluation Copy Build 7601"
I have good BkUps. What should I do? Sit tight?
Hi, Hammerhead!

Since you've ran the cleanup routine you will be unable to uninstall the SP1 RC. When the SP1 RTM is released you will have to do a clean install of Win 7 in order to install it.

You can also use a backup before you ran the cleanup tool and then install the SP1 RTM or use a backup before you installed the RC and then install the RTM.

In the meantime, if you really want the RTM, you'll have to restore from backup, find the leaked file and then install the leaked RTM. Otherwise, as you mentioned, sit tight until MS officially releases it and then perform your restore and installation of the RTM.
My System SpecsSystem Spec
.

23 Jan 2011   #314
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by och View Post
Tried both the readiness patch and sfc /scannow, and still SP1 wont install.
You'll have to dig in your CBS.log in order to trace why it doesn't install...

C:\WINDOWS\Logs\CBS, then copy the cbs.log in your documents. Near the end of the Log you'll start to see errors...

Post here the line when it start to say error.
My System SpecsSystem Spec
23 Jan 2011   #315
och

Win7 64 bit
 
 

Well, this is where the fails start

Code:
 
2011-01-23 12:02:45, Error CBS Failed. Attempted to uninstall a version of a non-driver component that is not installed, version: 0X600011db04001, component: x86_microsoft-windows-mail-core-dll_31bf3856ad364e35_6.1.7600.16385_none_585517a9869db81d, owner: Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.Microsoft-Windows-Client-Features-Update [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to mergecomponent [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS ComponentAnalyzerUninstallDeployment: Failed on update: Microsoft-Windows-Client-Features-Update [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to execute item[0] in Package: Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Update: Microsoft-Windows-Client-Features-Update [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to execute execution update. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to execute execution package: Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7600.16385 [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to prepare execution [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CSI 0000000e@2011/1/23:17:02:45.857 CSI Transaction @0x3478aa0 destroyed
2011-01-23 12:02:45, Info CBS Perf: InstallUninstallChain complete.
2011-01-23 12:02:45, Info CBS Failed to execute execution chain. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Error CBS Failed to process single phase execution. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status: 0x80004005, failure source: Execute, start state: Partially Installed, target state: Installed, client id: SP Coordinater Engine
2011-01-23 12:02:45, Info CBS Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-01-23 12:02:45, Info CBS Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-01-23 12:02:45, Info CBS Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without it...
2011-01-23 12:02:46, Info CBS Reboot mark refs: 0
2011-01-23 12:02:46, Info CBS SQM: Reporting package change for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current: Partially Installed, pending: Default, start: Partially Installed, applicable: Installed, target: Installed, limit: Installed, hotpatch status: DisabledBecauseNoHotpatchPackagesInitiated, status: 0x0, failure source: Execute, reboot required: False, client id: SP Coordinater Engine, initiated offline: False, execution sequence: 240, first merged sequence: 240
2011-01-23 12:02:46, Info CBS SQM: Upload requested for report: PackageChangeBegin_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, session id: 101457923, sample type: Standard
2011-01-23 12:02:46, Info CBS SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-01-23 12:02:46, Info CBS SQM: Reporting package change completion for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current: Partially Installed, original: Partially Installed, target: Installed, status: 0x80004005, failure source: Execute, failure details: "(null)", client id: SP Coordinater Engine, initiated offline: False, execution sequence: 240, first merged sequence: 240
2011-01-23 12:02:46, Info CBS SQM: execute time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-01-23 12:02:46, Info CBS SQM: Upload requested for report: PackageChangeEnd_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, session id: 101457924, sample type: Standard
2011-01-23 12:02:46, Info CBS SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-01-23 12:02:46, Info CBS Enabling LKG boot option
2011-01-23 12:02:46, Info CBS Restored system sleep block state: 0x80000000
2011-01-23 12:02:46, Info CBS SPI: Error callback - 0x80004005
2011-01-23 12:02:46, Info CBS Exec: Processing complete. Session: 30128926_2199388262, Package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:46, Error CBS Failed to perform operation. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:46, Info CBS Session: 30128926_2199388262 finalized. Reboot required: no [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:46, Error CBS SPI: (CSPICbsClient::Finalize:737)Failed to finalize session hr=0x80004005
2011-01-23 12:02:46, Error CBS SPI: (CSPICbsClient::ChangeState:519)Failed to finalize CBS session to install package hr=0x80004005
2011-01-23 12:02:46, Error CBS SPI: (CSPCInstallTask::Execute:1010)Failed to install package with identity Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 hr=0x80004005
2011-01-23 12:02:46, Info CBS SPI: Reporting Failed package event
2011-01-23 12:02:46, Error CBS Cannot finalize a session that has been finalized. [HRESULT = 0x800f0842 - CBS_E_SESSION_FINALIZED]
2011-01-23 12:02:46, Info CBS Session: 30128926_2199388262 finalized. Reboot required: no [HRESULT = 0x800f0842 - CBS_E_SESSION_FINALIZED]
2011-01-23 12:02:46, Error CBS SPI: (CSPICbsClient::Finalize:737)Failed to finalize session hr=0x800f0842
2011-01-23 12:03:52, Info CBS SPI: Deleting directory: C:\4553d1fd499fd3b0f554f19c33c4\76f5db96e2ab51ac04d921a6809ecf\4fadc32e49206c7918335c0de4c02dc1. ret=0
2011-01-23 12:03:52, Error CBS SPI: (CSPInstall::Install:1583)Failed executing Install task hr=0x80004005
2011-01-23 12:03:52, Info CBS SPI: Ending SP Installation
2011-01-23 12:03:52, Error CBS SPI: (PerformSPInstallation:833)Failed to install SP using UI hr=0x80004005
2011-01-23 12:03:52, Error CBS SPI: (wmain:1105)Failed to perform SP installation hr=0x80004005
2011-01-23 12:03:52, Info CBS SPI: Reporting Failed event
My System SpecsSystem Spec
23 Jan 2011   #316
QuackPot

Windows 7 Professional x64
 
 

Quote   Quote: Originally Posted by Ex_Brit View Post
This is what has been made public so far:

In addition to the regular updates there are the following:

Additional support for communication with third-party federation services:
· Additional support has been added to allow Windows 7 clients to effectively communicate with third-party identity federation services (those supporting the WS-Federation passive profile protocol). This change enhances platform interoperability, and improves the ability to communicate identity and authentication information between organizations.

Improved HDMI audio device performance:
· A small percentage of users have reported issues in which the connection between computers running Windows 7 and HDMI audio devices can be lost after system reboots. Updates have been incorporated into SP1 to ensure that connections between Windows 7 computers and HDMI audio devices are consistently maintained.


Changes common to both client and server platforms:
· Change to behavior of “Restore previous folders at logon” functionality
· SP1 changes the behavior of the “Restore previous folders at logon” function available in the Folder Options Explorer dialog. Prior to SP1, previous folders would be restored in a cascaded position based on the location of the most recently active folder. That behavior changes in SP1 so that all folders are restored to their previous positions.


Enhanced support for additional identities in RRAS and IPsec:
· Support for additional identification types has been added to the Identification field in the IKEv2 authentication protocol. This allows for a variety of additional forms of identification (such as E-mail ID or Certificate Subject) to be used when performing authentication using the IKEv2 protocol.


Support for Advanced Vector Extensions (AVX):
· There has always been a growing need for ever more computing power and as usage models change, processors instruction set architectures evolve to support these growing demands. Advanced Vector Extensions (AVX) is a 256 bit instruction set extension for processors. AVX is designed to allow for improved performance for applications that are floating point intensive. Support for AVX is a part of SP1 to allow applications to fully utilize the new instruction set and register extensions.

· Changes specific to Windows Server 2008 R2
Dynamic Memory:
· Constraints on the allocation of physical memory represents one of the greatest challenges organizations face as they adopt new virtualization technology and consolidate their infrastructure. With Dynamic Memory, an enhancement to Hyper-V™ introduced in Windows Server 2008 R2 SP1, organizations can now make the most efficient use of available physical memory, allowing them to realize the greatest possible potential from their virtualization resources. Dynamic Memory allows for memory on a host machine to be pooled and dynamically distributed to virtual machines as necessary. Memory is dynamically added or removed based on current workloads, and is done so without service interruption.

Microsoft RemoteFX:
· Businesses are increasingly looking to leverage the efficiency and cost savings that can come from a virtualized desktop infrastructure. With the addition of Microsoft RemoteFX in Windows Server 2008 R2 SP1, a new set of remote user experience capabilities that enable a media-rich user environment for virtual desktops, session-based desktops and remote applications is introduced. Harnessing the power of virtualized graphics resources, RemoteFX can be deployed to a range of thick and thin client devices, enabling cost-effective, local-like access to graphics-intensive applications and a broad array of end user peripherals, improving productivity of remote users.

· RemoteFX can function independently from specific graphics stacks and supports any screen content, including today’s most advanced applications and rich content (including Silverlight and Adobe Flash), ensuring that end users maintain a rich, local-like desktop experience even in a virtualized thin-client environment.

· RemoteFX also adds mainstream USB device support to virtual desktop computing, including support for USB drives, cameras and PDAs connected to the client device. RemoteFX also provides a platform for hardware and software partners to enhance RemoteFX capabilities in a variety of possible host, client and network configurations.

· To use RemoteFX, the virtualization server must be running Windows Server 2008 R2 with SP1, the virtual machine must be running Windows 7 Enterprise with SP1 or Windows 7 Ultimate with SP1, and the remote client computer must be running either Windows Server 2008 R2 with SP1 or Windows 7 with SP1. To connect to the virtual machine, the remote client computer requires an updated version of Remote Desktop Services (included in the service pack for all editions of Windows 7).

Enhancements to scalability and high availability when using DirectAccess:
· DirectAccess is a new feature in the Windows 7 and Windows Server 2008 R2 operating systems that gives users the experience of being seamlessly connected to their corporate network any time they have Internet access. In Windows Server 2008 R2 SP1, improvements have been made to enhance scalability and high availability when using DirectAccess, through the addition of support for 6to4 and ISATAP addresses when using DirectAccess in conjunction with Network Load Balancing (NLB).

Support for Managed Service Accounts (MSAs) in secure branch office scenarios:
· SP1 enables enhanced support for managed service accounts (MSAs) to be used on domain-member services located in perimeter networks (also known as DMZs or extranets).

Support for increased volume of authentication traffic on domain controllers connected to high-latency networks:
· As a greater volume of IT infrastructure migrates to cloud-based services, there is a need for higher thresholds of authentication traffic to domain controllers located on high-latency networks (such as the public Internet). SP1 allows for more granular control of the maximum number of possible concurrent connections to a domain controller, enabling a greater degree of performance tuning for service providers.

Enhancements to Failover Clustering with Storage:
· SP1 enables enhanced support for how Failover Clustering works with storage that is not visible for all cluster nodes. In SP1, improvements have been made to the Cluster Validation and multiple Failover Cluster Manager wizards to allow workloads to use disks that are shared between a subset of cluster nodes.
Good to know about the audio. I tried getting my new PC to work with my new HDTV and I couldn't get audio to work. But I also saw on the nvidia boards that it may be down to a nvidia driver issue.
My System SpecsSystem Spec
23 Jan 2011   #317
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

Quote   Quote: Originally Posted by och View Post
Well, this is where the fails start

Code:
 
2011-01-23 12:02:45, Error CBS Failed. Attempted to uninstall a version of a non-driver component that is not installed, version: 0X600011db04001, component: x86_microsoft-windows-mail-core-dll_31bf3856ad364e35_6.1.7600.16385_none_585517a9869db81d, owner: Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.Microsoft-Windows-Client-Features-Update [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to mergecomponent [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS ComponentAnalyzerUninstallDeployment: Failed on update: Microsoft-Windows-Client-Features-Update [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to execute item[0] in Package: Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7600.16385, Update: Microsoft-Windows-Client-Features-Update [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to execute execution update. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to execute execution package: Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7600.16385 [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS Failed to prepare execution [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CSI 0000000e@2011/1/23:17:02:45.857 CSI Transaction @0x3478aa0 destroyed
2011-01-23 12:02:45, Info CBS Perf: InstallUninstallChain complete.
2011-01-23 12:02:45, Info CBS Failed to execute execution chain. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Error CBS Failed to process single phase execution. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:45, Info CBS WER: Generating failure report for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, status: 0x80004005, failure source: Execute, start state: Partially Installed, target state: Installed, client id: SP Coordinater Engine
2011-01-23 12:02:45, Info CBS Failed to query DisableWerReporting flag. Assuming not set... [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2011-01-23 12:02:45, Info CBS Failed to add %windir%\winsxs\pending.xml to WER report because it is missing. Continuing without it...
2011-01-23 12:02:45, Info CBS Failed to add %windir%\winsxs\pending.xml.bad to WER report because it is missing. Continuing without it...
2011-01-23 12:02:46, Info CBS Reboot mark refs: 0
2011-01-23 12:02:46, Info CBS SQM: Reporting package change for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current: Partially Installed, pending: Default, start: Partially Installed, applicable: Installed, target: Installed, limit: Installed, hotpatch status: DisabledBecauseNoHotpatchPackagesInitiated, status: 0x0, failure source: Execute, reboot required: False, client id: SP Coordinater Engine, initiated offline: False, execution sequence: 240, first merged sequence: 240
2011-01-23 12:02:46, Info CBS SQM: Upload requested for report: PackageChangeBegin_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, session id: 101457923, sample type: Standard
2011-01-23 12:02:46, Info CBS SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-01-23 12:02:46, Info CBS SQM: Reporting package change completion for package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, current: Partially Installed, original: Partially Installed, target: Installed, status: 0x80004005, failure source: Execute, failure details: "(null)", client id: SP Coordinater Engine, initiated offline: False, execution sequence: 240, first merged sequence: 240
2011-01-23 12:02:46, Info CBS SQM: execute time performance datapoint is invalid. [HRESULT = 0x80070490 - ERROR_NOT_FOUND]
2011-01-23 12:02:46, Info CBS SQM: Upload requested for report: PackageChangeEnd_Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514, session id: 101457924, sample type: Standard
2011-01-23 12:02:46, Info CBS SQM: Ignoring upload request because the sample type is not enabled: Standard
2011-01-23 12:02:46, Info CBS Enabling LKG boot option
2011-01-23 12:02:46, Info CBS Restored system sleep block state: 0x80000000
2011-01-23 12:02:46, Info CBS SPI: Error callback - 0x80004005
2011-01-23 12:02:46, Info CBS Exec: Processing complete. Session: 30128926_2199388262, Package: Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:46, Error CBS Failed to perform operation. [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:46, Info CBS Session: 30128926_2199388262 finalized. Reboot required: no [HRESULT = 0x80004005 - E_FAIL]
2011-01-23 12:02:46, Error CBS SPI: (CSPICbsClient::Finalize:737)Failed to finalize session hr=0x80004005
2011-01-23 12:02:46, Error CBS SPI: (CSPICbsClient::ChangeState:519)Failed to finalize CBS session to install package hr=0x80004005
2011-01-23 12:02:46, Error CBS SPI: (CSPCInstallTask::Execute:1010)Failed to install package with identity Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 hr=0x80004005
2011-01-23 12:02:46, Info CBS SPI: Reporting Failed package event
2011-01-23 12:02:46, Error CBS Cannot finalize a session that has been finalized. [HRESULT = 0x800f0842 - CBS_E_SESSION_FINALIZED]
2011-01-23 12:02:46, Info CBS Session: 30128926_2199388262 finalized. Reboot required: no [HRESULT = 0x800f0842 - CBS_E_SESSION_FINALIZED]
2011-01-23 12:02:46, Error CBS SPI: (CSPICbsClient::Finalize:737)Failed to finalize session hr=0x800f0842
2011-01-23 12:03:52, Info CBS SPI: Deleting directory: C:\4553d1fd499fd3b0f554f19c33c4\76f5db96e2ab51ac04d921a6809ecf\4fadc32e49206c7918335c0de4c02dc1. ret=0
2011-01-23 12:03:52, Error CBS SPI: (CSPInstall::Install:1583)Failed executing Install task hr=0x80004005
2011-01-23 12:03:52, Info CBS SPI: Ending SP Installation
2011-01-23 12:03:52, Error CBS SPI: (PerformSPInstallation:833)Failed to install SP using UI hr=0x80004005
2011-01-23 12:03:52, Error CBS SPI: (wmain:1105)Failed to perform SP installation hr=0x80004005
2011-01-23 12:03:52, Info CBS SPI: Reporting Failed event
You've got the same prob as me...:

"2011-01-23 12:02:45, Error CBS Failed. Attempted to uninstall a version of a non-driver component that is not installed, version: 0X600011db04001, component: x86_microsoft-windows-mail-core-dll_31bf3856ad364e35_6.1.7600.16385_none_585517a9869db81d, owner: Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.Microsoft-Windows-Client-Features-Update [HRESULT = 0x80004005 - E_FAIL]"

This is the C:\WINDOWS\winsxs...x86 package that is the original provided by Windows 7 install (see screenshot).
This msoe.dll had been updated since during 2010 and the version now installed is now patched & different.

I've have tried to replace this original file but the SP1 install failed again with the same code in return.

I believe it might be a bug on x64 based system to correct...hope MS Techs are around to help.
I did apply some registry setting aswell provided in another thread but still fail with same error...


Attached Thumbnails
Microsoft confirms Windows 7 SP1 RTM, released to OEMs today-capture.png  
My System SpecsSystem Spec
23 Jan 2011   #318
HammerHead

win 7 X64 Ultimate SP1
 
 
Different File

MIKEDL
OK I think I got mine. Laid down a save image and secured a different file from the net. Installed with no watermark. System says SP1 and so far everything looks ok.
My System SpecsSystem Spec
23 Jan 2011   #319
mikedl

Windows 7 Ultimate x64 SP1
 
 

Quote   Quote: Originally Posted by HammerHead View Post
MIKEDL
OK I think I got mine. Laid down a save image and secured a different file from the net. Installed with no watermark. System says SP1 and so far everything looks ok.
Hi, again, Hammerhead!

It appears you're a step ahead, then, Hammerhead. If you're really curious, check your registry for "HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows NT\CurrentVersion" and look at the BuildLab value. It should read "7601.win7sp1_rtm.101119-1850". Also check the "BuildLabEx" entry and it should read "7601.17514.amd64fre.win7sp1_rtm.101119-1850". The numbers in bold indicate the RTM build.

Back to the game! Go Pack!
My System SpecsSystem Spec
23 Jan 2011   #320
HammerHead

win 7 X64 Ultimate SP1
 
 
A ok

mikedl


Microsoft confirms Windows 7 SP1 RTM, released to OEMs today-reg-snip.png

Looks good. Everything is working so far.

Greenbay is have a good day!!!!


My System SpecsSystem Spec
Closed Thread

 Microsoft confirms Windows 7 SP1 RTM, released to OEMs today




Thread Tools




Similar help and support threads
Thread Forum
Microsoft pulls last lever, discounts Windows 8 to OEMs to spark sales
Read the full article here: Microsoft pulls last lever, discounts Windows 8 to OEMs to spark sales - Computerworld
News
Microsoft confirms October 25 launch for Windows 8
Read More
News
Microsoft Confirms x64 Windows 7 Aero Vulnerability
Source - Microsoft Confirms x64 Windows 7 Aero Vulnerability - In the Windows Canonical Display Driver - Softpedia
News
OEMs pay Microsoft about $50 for each copy of Windows
Microsoft has revealed that, for a $1000 PC, it has always charged the OEM about $50, or five percent, for Windows. Full Story: OEMs pay Microsoft about $50 for each copy of Windows - Ars Technica
News
OEMs Pick Up Windows 7 RTM Code Today in Redmond
More...
News
Steve Balmer confirms it RTM has been released
what i think is so cool is we have said this for weeks. 7600.16385.090713-1255 is confirmed as the official RTM build, according to Steven Sinofsky "today after all the validation checks were met, we signed off and declared build 7600.16385 as RTM." HEHE i have it installed already..... I knew it...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:00.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App