Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Win7 SP1 released to public

23 Feb 2011   #161
Teerex

Windows 7 x64 Ultimate SP1
 
 

Quote   Quote: Originally Posted by Hopalong X View Post
Stalker
I also got this one KB2387530. Recommended.

Mike
This one failed on my system, and it is not on offer any more. Funny. The error code was error 0x80242016, which, when 'translated', means

WU_E_UH_POSTREBOOTUNEXPECTEDSTATE=The state of the update after its post-reboot operation has completed is unexpected

which, according to me being unable to install it separately afterwards means it was not supposed to update a post-SP1 system. Some scheduling errors, perhaps, in Microsoft updates central dispatch?


My System SpecsSystem Spec
.
23 Feb 2011   #162
elbeasto

Windows 7 Home Premium x64
 
 

Just installed SP1 via automatic updates & it seems to have hung during the shut down process after configuring the updates.
Is it supposed to be stuck there for more than 10mins?
My System SpecsSystem Spec
23 Feb 2011   #163
sygnus21

Windows 10 Pro
 
 

No, not really. Try restarting the system and see what happens. If it still hangs try the update again.

Let us know.
My System SpecsSystem Spec
.

23 Feb 2011   #164
Hopalong X

Windows7 Pro 64bit SP-1; Windows XP Pro 32bit
 
 

Quote   Quote: Originally Posted by Teerex View Post
Quote   Quote: Originally Posted by Hopalong X View Post
Stalker
I also got this one KB2387530. Recommended.

Mike
This one failed on my system, and it is not on offer any more. Funny. The error code was error 0x80242016, which, when 'translated', means

WU_E_UH_POSTREBOOTUNEXPECTEDSTATE=The state of the update after its post-reboot operation has completed is unexpected

which, according to me being unable to install it separately afterwards means it was not supposed to update a post-SP1 system. Some scheduling errors, perhaps, in Microsoft updates central dispatch?
I installed all three of the little updates before SP1.

You may not need it after SP1. It may have included it in the service pack or just may not be needed now.

If it shows as an update later you can try it again then.
I wouldn't worry about it for now.

Mike
My System SpecsSystem Spec
23 Feb 2011   #165
alphanumeric

Windows 10 Education 64 bit
 
 

Quote   Quote: Originally Posted by sygnus21 View Post
Quote   Quote: Originally Posted by Ponmayilal View Post
^ that is only the SP1 update. In their words "This DVD image contains standalone update for all architectures."

What we want is the slipstreamed Windows 7.
Have you seen this - Slipstream Windows 7 SP1 into a Installation DVD or ISO File. It's not the slipstreamed version itself.... but you can make your own
Yes, I was referring to the actual windows 7 installation disk with SP1 integrated into it. Just about everyone can get SP1, but you can't get an actual Microsoft Windows 7 ISO unless you have a TechNet or MSDN subscription. I don't need another product code all I want is the Windows 7 + SP1 install media. I've got it but it wasn't easy finding it and downloading it.
This isn't meant to be a criticism of the tutorial posted above. But if I went that route and had problems latter on down the road, I'd always be wondering if it was the slipstream (RT Seven Lite) that caused it. I'd likely then go back to installing SP1 separately. I'd just rather get the Microsoft created version if I could.
My System SpecsSystem Spec
23 Feb 2011   #166
sygnus21

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by Hopalong X View Post
Quote   Quote: Originally Posted by Teerex View Post
Quote   Quote: Originally Posted by Hopalong X View Post
Stalker
I also got this one KB2387530. Recommended.

Mike
This one failed on my system, and it is not on offer any more. Funny. The error code was error 0x80242016, which, when 'translated', means

WU_E_UH_POSTREBOOTUNEXPECTEDSTATE=The state of the update after its post-reboot operation has completed is unexpected

which, according to me being unable to install it separately afterwards means it was not supposed to update a post-SP1 system. Some scheduling errors, perhaps, in Microsoft updates central dispatch?
I installed all three of the little updates before SP1.

You may not need it after SP1. It may have included it in the service pack or just may not be needed now.

If it shows as an update later you can try it again then.
I wouldn't worry about it for now.

Mike
It's (KB2387530) not included in the update - according to the release notes found here - Download details: Documentation for Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) - second link (it's in excel format)
My System SpecsSystem Spec
23 Feb 2011   #167
panais

Windows 7 Ultimate 64bit SP1
 
 
What know?

I need the solution for this....
Help please!


Attached Thumbnails
Win7 SP1 released to public-sp1-cannot-continue.png  
My System SpecsSystem Spec
23 Feb 2011   #168
sygnus21

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by alphanumeric View Post
This isn't meant to be a criticism of the tutorial posted above. But if I went that route and had problems latter on down the road, I'd always be wondering if it was the slipstream (RT Seven Lite) that caused it. I'd likely then go back to installing SP1 separately. I'd just rather get the Microsoft created version if I could.
Understand, and actually ran into "problems" when upgrading from SP1 to SP2 in Vista because SP2 didn't like the vLite'd slipstreamed version of Vista with SP1. And again, no criticism as well, just something users did experience. I posted about that one here - Vista SP2 is out - Vista Forums

Anyways let's hope for better outcomes when/if the need arises as its way too early to foresee any problems with the fix Brink presents now
My System SpecsSystem Spec
23 Feb 2011   #169
Teerex

Windows 7 x64 Ultimate SP1
 
 

Quote   Quote: Originally Posted by sygnus21 View Post
It's (KB2387530) not included in the update - according to the release notes found here - Download details: Documentation for Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932) - second link (it's in excel format)
Thanks, I did a little research that seems to clear up the problem. One of the files updated by this failed update is Wcncsvc.dll, updated to version 6.1.7600.16661

Searched for it in system32, and lo & behold
Win7 SP1 released to public-wsn.jpg


My System SpecsSystem Spec
23 Feb 2011   #170
sygnus21

Windows 10 Pro
 
 

Glad to see you figured it out.
My System SpecsSystem Spec
Reply

 Win7 SP1 released to public




Thread Tools




Similar help and support threads
Thread Forum
How to relocate win7 public folders
I am using the method suggested in the Windows 7 Inside and Out book to relocate my user files. All seemed to be fine until I attempt to relocate the 'public music, public pictures, and others' files. The 'location' tab of properties of each public folder will not allow/accept changes to the...
Customization
Win7 Pro - Public Share asking for Username and Password
I am a newbie on here and this is my first post so please hang in there with me. We moved our offices from one location to another over the weekend. New ISP but everything else is the same. Have a peer-to-peer network with one pc (Win7 Professional) acting as the file server. Everyone now...
Network & Sharing
Win7 starter Public Desktop, where'd it go??
Hi All, What a great forum. I have just started with a Netbook and win7 starter and other than the Wallpaper issues, I have to say I am impressed with what it will actually do rather then feeling forced to upgrade to Home Premium. I can live without the wallpaper, but what has happened to the...
General Discussion
Windows 7 SP1 Public Beta Released
source ... Documentation: Documentation for Windows 7 and Windows Server 2008 R2 Service Pack 1 Beta (KB976932) See also: https://www.sevenforums.com/tutorials/99064-windows-7-service-pack-1-sp1-beta-uninstall.html
News
IE8 RC1 released to the public
As expected, Microsoft Monday released Internet Explorer 8 (IE8) Release Candidate 1 (RC1) to the public. You can grab the download from the Microsoft Download Center: for Vista and Server 2008 32-bit, for Vista and Server 2008 64-bit, for XP 32-bit, for Server 2003 SP2 32-bit, and for Server 2003...
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:30.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App