Samsung's 840 EVO update fixes slow reads with old data

    Samsung's 840 EVO update fixes slow reads with old data


    Posted: 15 Oct 2014
    Not sure where the appreciate place for this should be but...

    It seems the Samsung 840 EVO had a long undiscovered issue which was finally addressed this week

    Last month, Samsung confirmed that its 840 EVO SSD can suffer from slower read speeds with older data. The company promised to address the issue with updated firmware, and we've been experimenting with the fix.
    Before we get into the results of our testing, we should spend a moment on the problem itself. Here's how Samsung describes the issue:
    SSDs usually calibrate changes in the statuses of cells over time via the flash management software algorithm. Due to the error in the software algorithm, the 840 EVO performed read-retry processes aggressively, resulting in a drop in overall read performance. This only occurs if the data was kept in its initial cell without changing, and there are no symptoms of reduced read performance if the data was subsequently migrated from those cells or overwritten.
    Read-retry is used to compensate for changes in cell voltages, suggesting that voltage drift over time was a key factor here. The EVO's flash management routines evidently haven't been responding to voltage changes correctly.
    Fixing the problem is a two-part process managed by Samsung's appropriately named Performance Restoration tool. First, the utility flashes the SSD's firmware with the new EXT0CB6Q revision. Then, it reboots the system and completes the restoration process, which we're told involves "conditioning" the NAND. The entire process is non-destructive, so it shouldn't compromise any data on the drive. It also only needs to be run once. That said, the target drive must have at least 10% free capacity for the tool to work its magic.

    The data on the 840 EVOs we have in the lab isn't old enough to be affected by the flaw. Fortunately, our resident developer, Bruno "morphine" Ferreira, has been running an 840 EVO 500GB in his personal system for more than 10 months. Having already noticed slower performance with older files, he bravely volunteered to test Samsung's fix.
    The restoration process went off without a hitch, though it took over an hour to condition Bruno's drive. Read speeds seem to be much improved. Below is a screenshot from HD Tach, which tests read performance across the extent of the drive. Click the buttons below the image to switch between results from before and after the fix was applied.
    Source: Samsung's 840 EVO update fixes slow reads with old data - The Tech Report - Page 1
    sygnus21's Avatar Posted By: sygnus21
    15 Oct 2014



  1. 4wd
    Posts : 337
    W7, W8.1
       #1

    Thanks for the info. Applied to a msata EVO (imaged it 1st), all well.
      My Computer


  2. Posts : 185
    Win7 SP1 + Ultimate 64 bit
       #2

    I did this last week and noticed only a LITTLE performance increase. Oh well :)
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:51.
Find Us