Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System Build

11 Aug 2010   #21
sygnus21

Windows 10 Pro
 
 

Yes It does, look on the heatsink.

Good luck.


My System SpecsSystem Spec
.
11 Aug 2010   #22
jm1

Windows 7 Professional
 
 

I've assembled it. But, it's strange, for the power LED light all I have is two pins, one positive and one negative. But, the motherboard has three slots, one says MPD+, MPD-, and MPD-. I am stuck. What should I do here? Connect only two? Thanks for your help!

Diagram

Pin No. Definition

1 MPD+
2 MPD-
3 MPD-

P.S. It also says.

System Status LED

S0 On
S1 Blinking
S3/S4/S5 Off
My System SpecsSystem Spec
11 Aug 2010   #23
bobkn

Windows 7 Pro X64 SP1
 
 

Quote   Quote: Originally Posted by jm1 View Post
I've assembled it. But, it's strange, for the power LED light all I have is two pins, one positive and one negative. But, the motherboard has three slots, one says MPD+, MPD-, and MPD-. I am stuck. What should I do here? Connect only two? Thanks for your help!

Diagram

Pin No. Definition


1 MPD+
2 MPD-
3 MPD-

P.S. It also says.

System Status LED

S0 On
S1 Blinking
S3/S4/S5 Off

I'm not sure what sort of LED is intended for those pins.

However, the standard power LED connects in the block for the front panel. It's in the manual. You'll need to get the polarity right for it to work, just like for the HD activity LED.
My System SpecsSystem Spec
.

11 Aug 2010   #24
jm1

Windows 7 Professional
 
 

It's for the system power LED header. The mobo has three pin slots, but the case cable only has two. Do I just connect those? The manual says nothing about only two.
My System SpecsSystem Spec
11 Aug 2010   #25
jm1

Windows 7 Professional
 
 

After googling it. I found out that the 3-pin POWER_LED configuration is old and I can just use two. I'll give it a shot!
My System SpecsSystem Spec
11 Aug 2010   #26
jm1

Windows 7 Professional
 
 

HELP! TigerDirect said my CPU is not compatible with the Mobo. Is that true?
My System SpecsSystem Spec
11 Aug 2010   #27
jm1

Windows 7 Professional
 
 

Yay! I just started it up successfully! I ended up just hooking up the two pins to pin slot 1 and 3. Appears to work fine! I'll install Windows 7 tomorrow. Thanks once again for everyone's help!
My System SpecsSystem Spec
Reply

 System Build




Thread Tools




Similar help and support threads
Thread Forum
preposed build log for my new under 5 k computer system build
CASE - Rosewill Gaming Super Tower Computer Case BLACKHAWK-ULTRA primary drive ssd - Samsung Electronics 840 Pro Series 2.5-Inch 512 SATA_6_0_gb Solid State Drive MZ-7PD512BW sound card - ASUS PCI-Express x1 Sound Card XONAR ESSENCE STX/90-YAA0C0-0UAN00Z CPU - AMD FD8350FRHKBOX FX-8350...
PC Custom Builds and Overclocking
New system build
First let me say that I'm not sure that I'm in the right category, so I'll keep it short for now, and if I am in the right category I can give more details in my next reply. I'm upgrading my MOBO, CPU, and MEM. I have chosen the mobo and cpu but have yet to decide on the memory. I would like some...
PC Custom Builds and Overclocking
Upgrade a System - Build a New System
I have several things going on here. I have a HP dv7 latop I have to replace the fan on it. I also have a family member that has 2 old desktop systems that they no longer use, (one works the other I think needs a power supply) so I want to upgrade one of them if you think it's possible for my...
PC Custom Builds and Overclocking
Build My Own System
I built a barebones system earlier this year and found many issues with the standard components. I replaced the case, fans and CPU cooling system. I would like to build another but this time pick my components more carefully. There are so many cases, MOBOs, etc. I will be using for video...
PC Custom Builds and Overclocking
BSOD on new system build
Hello all! this is my first time posting in this forum. Unfortunately its about a problem that has been depressing me quite a bit. I just built a new system last friday with the following specs: Intel Core i5-2500 ASUS P8P67-M PRO,P67 (Rev 3.0) G.SKILL Ripjaws Series 4GB (2x2gb) Galaxy...
BSOD Help and Support
New system build
Hello all, Well, after a few weeks I finally got the new system up and running after having to go through two GA-X58A-UD7 board that would not post for me, and finally going with a ASUS P6X58D Premium board that did. I just didn't think it would be right to not share the build with you...
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:45.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App