Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: new case

08 Sep 2010   #1
bassfisher6522

Windows 7 Ultimate 64 bit
 
 
new case

I too, am looking for a new case to upgrade. My old one is a Ultra E-Torque mid tower ATX case. Nice and roomy but lacks ports in case for wire management. I have some specific options I'm looking for. They are as follows: mid/full tower, clear sided, 1 or 2 bays for 3.5" that are at the middle or bottom of front of case, ports for wire management, front panel jacks that are recessed and plug in parallel with case (not on top that plug straight down) and price around $100. I've been searching for weeks now and cant seem to find a case that has all the features I'm looking for. Any and all suggestions welcome. Now if my current case had some cable management ports I could deal with the front panel being on top of case.


My System SpecsSystem Spec
.
08 Sep 2010   #2
Airbot

Windows 7 Ultimate x64 SP1
 
 

My System SpecsSystem Spec
08 Sep 2010   #3
Lemur

Systems 1 and 2: Windows 7 Enterprise x64, Win 8 Developer
 
 

Yep, Airbot and I have similar taste. I have the same case. I added an extra-wide fan in the back. The cables are very organized.
My System SpecsSystem Spec
.

08 Sep 2010   #4
Airbot

Windows 7 Ultimate x64 SP1
 
 

You can keep the cables managed pretty good with the case, I have a couple pics of mine in my Albums on my profile page. Or from my sig - mah machine.

Although the front panel jacks aren't recessed in the front, more about just flush with the front. I think it meets most of those other requirements. The newer HAF 942 is a better design, but it cost more too. If I were to get a case now if I needed one, I would go with the 942, but I got mine before the 942 came out.

Might or might not be what you're looking for in a case, but it's an all around semi good case with nice airflow.
My System SpecsSystem Spec
08 Sep 2010   #5
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Cooler master HAF 932 ftw. My mod on it just makes it better

~Lordbob
My System SpecsSystem Spec
09 Sep 2010   #6
sygnus21

Windows 10 Pro
 
 

Or this one - Cooler Masters’ HAF X. Roomy, outstanding cable management, 3 big quiet fans, plus a 140mm rear, and two hot swappable bays. Also, you can turn off the front fan's LED by a switch on the top of the case. Bit expensive though - $199ish.

My thoughts here - https://www.sevenforums.com/overclock...r-s-haf-x.html
My System SpecsSystem Spec
09 Sep 2010   #7
Airbot

Windows 7 Ultimate x64 SP1
 
 

Yeah, the 942 is the HAF X.
My System SpecsSystem Spec
09 Sep 2010   #8
sygnus21

Windows 10 Pro
 
 

I only know it as the HAF X, which is what everyone else calls it
My System SpecsSystem Spec
09 Sep 2010   #9
Airbot

Windows 7 Ultimate x64 SP1
 
 

Yeah, it's the 942. I mentioned it.

COOLER MASTER Series HAF X Model RC-942-KKN1
My System SpecsSystem Spec
09 Sep 2010   #10
sygnus21

Windows 10 Pro
 
 

Yes the model# is RC-942-KKN1. It's just commonly known as, and marketed as the HAF X.

new case-haf-x-box.jpg

Most people won't recognize 942, but if you say HAF X, well. That's my point.

It's all good :)

At any rate it is a good case to consider, even at it's asking price.

Peace


My System SpecsSystem Spec
Reply

 new case




Thread Tools




Similar help and support threads
Thread Forum
The Case of the Missing Pillow Case
Please press play to set the right mood as you read. ;) NzlG28B-R8Y The Case of the Missing Pillow Case Today appeared to be a normal day just like any other. I had decided that I should strip the beds and wash the sheets from them since it had been a while and they were starting to...
Chillout Room
Case to Mod
Sup Guys... Im looking for a great case to mod... almost completely... so it doesnt have to have perspex sides... the preferred specifications of the case: Midi Case Multiple HDD bays MUST fit a RADEON HD4879 (about 10" - 11") Preferably BLACK
PC Custom Builds and Overclocking
Which case is better?
Well, I'm gunna be building a computer for the first time (as seen in my last thread here). I was carefully comparing some parts (and still kinda am), and found a few other cases cheaper (except the last, but because it has 8 fans), and also looks like some could be better functionality-wise,...
PC Custom Builds and Overclocking
New case?
not sure if you can help me but i have a Fujitsu Esprimo E5905 Desktop with a Fujitsu D2164 and the original case can only hold 1 hdd and 1 dvd drive i want at least 2 preferably 3 hdd's and 2 dvd drives can any one help me with what case i can get? :D:devil:
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:46.
Twitter Facebook Google+