CPU overclocking & heat

Page 1 of 4 123 ... LastLast

  1. Posts : 313
    Windows 7 Ultimate x86
       #1

    CPU overclocking & heat


    If you look at my system specs you will see my CPU.
    My max core temps are about 200*F. On a stead idle, my CPU should only be going around 100-115*F. Well, last night, having my chill mat, and usb hub plugged in (with a usb monitor and portable hard drive plugged into the hub) my CPU was at 183*F, and I'm really wondering why.. and now, even at an idle, it runs about 138-155*F, and I'm just trying to figure out why... does anyone know what might be going on?

    Yes, I know I need a new laptop, but that's out of my budget..
      My Computer


  2. Posts : 6,885
    Windows 7 Ultimate x64, Mint 9
       #2

    Can you put that in C? No one measures those temps in F.

    How do you know what your Idle temps should be?

    ~Lordbob
      My Computer


  3. Posts : 313
    Windows 7 Ultimate x86
    Thread Starter
       #3

    Because that's what it used to idle at...

    So, in C...

    it has a max of 90*C
    It should idle around 46*C
    Last night it was at 84*C
    Tonight it's at 67*C
      My Computer


  4. Posts : 2,259
    W7 Professional x64
       #4

    On my *first* DV9000, the processor overheated, and stayed hotter than normal, leading to a system failure. This may or may not be your case, but is what happened in mine, though I hit around 130C on the core temp. Also, on the DV series notebooks, the fan is almost directly connected to the processor heatsink, and excessive heat on the heatsink could have screwed up your fan. What's the RPM at?
      My Computer


  5. Posts : 313
    Windows 7 Ultimate x86
    Thread Starter
       #5

    How do I view the RPM's??? Though my fan does seem to work well, since last night it was whistling away like a siren.
      My Computer


  6. Posts : 2,259
    W7 Professional x64
       #6

    If there is no built in program, then something like hwmonitor or speedfan will tell you, I believe.
      My Computer


  7. Posts : 313
    Windows 7 Ultimate x86
    Thread Starter
       #7

    Not sure... task manager, speedfan, and hwmonitor all don't show my fan speeds.. I know my fan works because it runs quite a bit. I am just unable to view the speeds.
      My Computer


  8. Posts : 2,259
    W7 Professional x64
       #8

    It might not be hooked up that way. If it's working properly as far as you can tell, we've reached the end of my technical knowledge and I will have to pass the torch. How old is the notebook, by the way?
      My Computer


  9. Posts : 4,280
    Windows 7 ultimate 64 bit / XP Home sp3
       #9

    Don't know of any other programs to suggest, but have you tried blowing out the ports with canned compresed air? Laptops especially older ones tend to have a great deal of build up of fibers and dust due to user using them on their laps or other cloth or fiber surfaces.
    I'm pretty sure if you were to take it apart you would be amazed at how much dust ect is built up inside of it.
    Fabe
      My Computer


  10. Posts : 2,259
    W7 Professional x64
       #10

    Good advice too.
      My Computer


 
Page 1 of 4 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:05.
Find Us