ga-73pvm-s2h with artic cooling 7 rev 2 help

its diff mbo ,psu ,,only the case i used as didnt see any value in getting a new case

1. You need to make sure that there are no clearance issues with the height of the cooler.
2. You'll need proper ventilation if you're going to be gaming.
3. A PSU that has a 120mm fan to pull air out the case will help with ventilation.

p5bdkw said:

1. You need to make sure that there are no clearance issues with the height of the cooler.
2. You'll need proper ventilation if you're going to be gaming.
3. A PSU that has a 120mm fan to pull air out the case will help with ventilation.

i use jeantech 900 watt psu with a huge fan,just worried bout how the cpu will get fresh air,as the fan will not be facing side of case.

Will the air get thru the holes and the cooler will find

I was tinkering over putting a normal fan on the side where the vents are inline with the cpu,
Using cable ties mount it on the outside of case blowing air in,Thus my psu and exhaust fan taking the hot air out.

?

That sounds like a good solution, as long as the outtake is good.

indeed,i just dont fancy forking out for a case that has all the fan slots and stuff.
In my mind this idea works,i will insulate the outer fan on case ,but if it works why pay for stuff u dont need .
Thanks for help

Thanks

see my next pc purchase will be a custom built rig,using a gaming cas and the highest poss specs ,but im atleast 3 years of that ..games now are not all that advanced to call for such hardware in my view

i will pst pics when i completed the setup with fan on outer case 1be a laugh lol