New
#21
i have read that 1T is 2-3% fater than 2T, but it is nor that stable Soooo
2T, don't let it on auto
i have read that 1T is 2-3% fater than 2T, but it is nor that stable Soooo
2T, don't let it on auto
ok acording to cpu-z it is at 1T now. but in the bios its blank. doing my nut in now lol. just cos ive no history in bios. bet its piss easy once done a couple times/ once
Well like everything else it depends - If it isn't in spec, the RAM is going to be unstable, especially if the RAM isn't a good overclocker.
Anyway I have my RAM running at 8-8-8-20 1T stable even though it's spec'd at 8-8-8-24 2T.
Again, not all modules will be able to run past it's rated specs and remain stable.
It doesn't mean he can't try it overclock it. Again, you never know what you have until you try.
At any rate his problem is that he hasn't been able to get the RAM to run it full spec. And I would suggest fixing that first before overclocking (over specing) it.
And BTW my RAM isn't exactly high performance - Corsair TR3X6G1600C8D Dominator 6 GB 3 x 2 GB PC3-12800 1600MHz
lolol,, bit of a debate.....nah i dont wanna oc. i dont see the point if a pc handles wot it needs to with ease. its anew build and all i do is game n stream movies.in a couple of years i may oc but not now. ive looked into it just for somethin 2 read lol but not for me yet. ive had enough messin for now lol.
i just wanna get it to wot it should b
edit; if TRC is tRAS+tRP howcome it says it should b 41 if tRP=9 and tRAS=24? my math brings that to 33 lol. i can understand why peeps get pickled,
Sorry but I don't understand all the slang you're using.
Anyway I don't have all the answers but if you really want to learn about timings here's some info - Understanding RAM Timings | Hardware Secrets
Peace
ive just been lookin on the newegg site in the reviews and most r saying that it will run at spec'd timings but with a lower voltage of 1.54v instead of 1.65v. it would b better if it will run at the lower voltage wouldnt it
CHEERS FOLKS MUCH APRECIATED
EDIT; good link about timings :)
Last edited by ganjiry; 18 Jul 2011 at 11:15.
Yes I figured out your kit by the model no., ok it is really not high end but half-way to that
It may increase the life-span of the module, but make sure that it is stable(run memtest86 overnight)
okey dokey thanks very much both
just d-loaded memtest