Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: I may just be the first on the block with new H100

29 Aug 2011   #21
pparks1

Windows 7 Ultimate x64
 
 

out of curiosity, what were your load temp before? I know your idle went down 2 Celcius, so it must have been 40-41 before...but what about under load?


My System SpecsSystem Spec
.
29 Aug 2011   #22
Layback Bear

Windows 10 Pro. 64/ version 1709
 
 

linnemeyerhere

Very good temps. Thanks for the info.
My System SpecsSystem Spec
29 Aug 2011   #23
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

The 2 degrees was idle temps but I have to say that both the H50 and H100 hold temps at full tilt under 50-52c and this is sizzling summer temps with the ambient soaring inside the house. Like right now the room is cooler at 30.6c and the system is 37c at idle.
My System SpecsSystem Spec
.

29 Aug 2011   #24
DaGooN

Windows 7 64bit Ultimate SP1, VMware Windows 7 64bit Ultimate SP1
 
 

Damn my Antect Fusion Remote Max case lol
nice temps there. im sure though the Noctua NH D14 would be better?
My System SpecsSystem Spec
29 Aug 2011   #25
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

There are so many variables, case, location, number of fans, ambient temps, mobo, gpu(s) and as my AMD quad 3.4 is pushed to 4.0 totally changes the numbers, like buying a car for mileage....."you mileage may vary"! Oh and I just stuck the pump down with it's stock thermal paste.
My System SpecsSystem Spec
03 Sep 2011   #26
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

So overall, worth the change? Or pretty much a wash and just happy to have the cool new bling?

A Guy
My System SpecsSystem Spec
03 Sep 2011   #27
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

I'll take my 2-3 degree Celsius drop and enjoy it with a slightly greater peace of mind while working and playing in what is a very hot area of So. Cal. and in the hottest room in the house. This whole install has me impressed with Corsair products and very impressed with that little H50. Really to my eyes I now have a controllable pump which I run wide open always and twice the radiator cooling surface. If you have the space and a open grate pattern which allows for the two 120mm fans side by side with no gap then I say go for it. But if your running a H70 or H80 series now then hold on to your money.
My System SpecsSystem Spec
03 Sep 2011   #28
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Thanks Alan

A Guy
My System SpecsSystem Spec
03 Sep 2011   #29
carwiz

Windows 7 Pro-x64
 
 

Just curious, have you measured the radiator inlet and outlet temperatures? There's a horrific loss of cooling capability with the way they set up their fans. But hey, I'm just a carwiz.
My System SpecsSystem Spec
04 Sep 2011   #30
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

carwiz,
I haven't and wouldn't know how to go about it. I'm not a big fan....pun intended of Corsair stock fans. But with four 120mm fans encasing the radiator I compromised and ran the black Corsairs in speed control to quiet them as pullers on the outside and visible to the eye from the top. The beautifully ugly Noctua's are inside and out-a-sight !
My System SpecsSystem Spec
Reply

 I may just be the first on the block with new H100




Thread Tools




Similar help and support threads
Thread Forum
Ping DG, ftp block/httpd block
Hello Guys, I find this to be quite embarrassing, having an issue like this that I can't figure out. Here's what I can't do. 1. Ping DG (Default Gateway) 2. Ping my IP (96.46.29.108) 3. Can't access my router via remote, even though its setup to allow it.
Network & Sharing
New CPU cooler. H100, H80, H70 Core with custom fans or H2o 620?
Hi guys, I'm trying to decide between an Antec H2o 620, an H70 core with custom fans, an H80 and an H100. I'm running an 8210 Oc'ed to 4300K and do play some demanding games. My case comes prepared to install a 240 mm radiator, hence the H100 is an option, but I think it might be overkill and...
PC Custom Builds and Overclocking
H100 pump makes somewhat loud grinding noise
Just finished installing my upgrades to my computer, including a nice new H100, and it would appear my hopes for a silent PC one day have been blown out of the water, with this cooler at least. The pump unit is making a sound like...well...a loud pump really, a constant grinding/buzzing/humming...
Hardware & Devices
H100 Installation
I can't get my H100 Corsair CPU cooler installed. I have the right screws but the if I use the screws mentioned in the manual guide, the cooler won't fit ontop of the screws because one side is too thick. If I use the thinner part of the screw it won't touch the CPU. I've been stuck on this for...
Hardware & Devices
Looking for 4 fans for a Corsair H100 Cooler
Looking for 4 fans for a Corsair H100 Cooler. Something nice that would work well with this cooler in a push/pull set-up.
Hardware & Devices
DR0, has a bad block
Problem, The device, \Device\Harddisk0\DR0, has a bad block. SeaTools results: Short DST - Fail Long DST - Fail Short Generic - Fail Long Generic - Fail HD Tune results: 1 Error at 0 Mb (LBA 1408)
Hardware & Devices


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 21:27.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App