hd6850 failed to oc at all


  1. Posts : 3,118
    Win7 Home Premium x64 SP1
       #1

    hd6850 failed to oc at all


    hi all
    i recently tried to oc my xfx hd6850 n failed. thing is all i had done was up the core clock by 15mhz in 3 steps of 5mhz.
    playing deus ex it was runnin ok but within a few mins of bfbc2 online it crashed. i had to hit the reset button on my case. couldnt alt tab or cntrl,alt, delete.
    i would of thought it would oc more as the reviews ive read mostly say its a good overclocker.
    any ideas? or hav i just got a poor overclocker?
    cheers folks
      My Computer


  2. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #2

    Could be a number of things Check the Pci Latency timer if it is set to 32 or 64 /96 or 128

    If it is above 32 bring it back to 32 Also if you have a Oc'ed CPU if could have a effect on the Gpu remember these things go hand and hand when gaming the system relies on the cpu just as much as the Gpu

    This was the case when i tuned my then Hd 5770 kept crashing the Latency was to high

    But if that doesnt work try it in another system try to incress the clock if it crashes again then your card is where it is

    I would probally look into swapping it out in case before it could turn bad

    But ussually Overclocking can conflict a couple pieces of hardware if not done correctly
      My Computer


  3. Posts : 3,118
    Win7 Home Premium x64 SP1
    Thread Starter
       #3

    hi Solarstarshines
    thanks 4 the reply. my cpu is only oc'd to 3.6ghz. i probably would of returned my gpu to stock clocks after anyway. just wanted to c wot it was like. il just leave it as is now i think as i dont realy need to oc it. my rig munches through anny game anyhow. maybe il try again wen im due to upgrade
    thanks for the advice tho. much apreciated
      My Computer


  4. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #4

    Hmmm that is wierd i have the same CPU at 4 GHZ
      My Computer


  5. Posts : 2,562
    windows 10 pro 64 bit
       #5

    Overclocking is part skill/knowledge, and part luck of the draw...I have the same CPU....3.6 is max overclock....3.7 will blue screen out sooner or later.....
      My Computer


  6. Posts : 3,118
    Win7 Home Premium x64 SP1
    Thread Starter
       #6

    hi folks.
    its not that my cpu will only go up to 3.6. thats just as far as i have tried. total noob when it comes to oc. ive read up on it loads over the past few months b4 touchin anythin. out of lazyness i didnt want to try too much as gigabyte stuck the cmos jumper and battery right under my gpu. n i cant b arsed to take it out lol. cheers folks
      My Computer


  7. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #7

    ganjiry said:
    hi folks.
    its not that my cpu will only go up to 3.6. thats just as far as i have tried. total noob when it comes to oc. ive read up on it loads over the past few months b4 touchin anythin. out of lazyness i didnt want to try too much as gigabyte stuck the cmos jumper and battery right under my gpu. n i cant b arsed to take it out lol. cheers folks

    Honestly I think it is the MB that holds you back same chip different board

    My wall was 3.6 as well till i changed the board ,I could actually get a 4.1 out of this chip but it isn't worth it
      My Computer


  8. Posts : 3,118
    Win7 Home Premium x64 SP1
    Thread Starter
       #8

    most peeps r sayin its good for 4ghz at stock voltage too. tiss a good cpu from wot ive seen
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:30.
Find Us