Show Us Your Rig [3]


  1. Posts : 26,863
    Windows 11 Pro
       #1321

    Niklu, nice looking rig. that D14 didn't give the 690 much room did it. On my last rig, my D14 wouldn't let me put my card in the top X16 slot, I had to put it in the second slot. Nice job. Good looking rig.
      My Computer


  2. Posts : 3,253
    Windows 10 Pro x 2/Windows 11 Home
       #1322

    StalkeR said:
    I have buy CM Hyper 101 cpu cooler, and mounted it. Here is picture from my rig inside. :)

    Attachment 218591
    Stalker here is that exta fan from my virtual inventory.

    Show Us Your Rig [3]-f-cooler-master-hyper-101-rr-h101-30pk-ru.jpg


    Niklu said:
    Hello :) I looked pictures here and people have so nice computers.After that i looked inside my case and terrible"snake nest" there, wires all over the case.So i started to do something for that and made wiring again. Now its not perfect but better than before. sadly i didnt take picture before cleaning. but now it looks like this.. few pictures..
    Attachment 218627

    Attachment 218628

    Attachment 218629

    Attachment 218630

    Cool Rig Niklu yours has cleaner wiring, newer processor, Sabertooth mobo & HAF 932 case + LED's and fancy Nocta cooler to boot.
      My Computer


  3. Posts : 37
    Windows 7 Ultimate
       #1323

    I have finally gotten the 4 Noctua fans I wanted into my case. All for about $45 today

    Too bad they don't make fans for power supplies so I can replace that one also.
    Sooner or later, I am going to replace the 200mm exhaust fan at the top with possibly 4 92mm or 80mm Noctua fans hopefully.
    Attached Thumbnails Attached Thumbnails Show Us Your Rig [3]-dsc_0563.jpg   Show Us Your Rig [3]-dsc_0564.jpg  
      My Computer


  4. Posts : 53,363
    Windows 10 Home x64
       #1324

    StalkeR said:
    I have buy CM Hyper 101 cpu cooler, and mounted it. Here is picture from my rig inside. :)

    Attachment 218591
    Good one Boshko

    Niklu said:
    Hello :) I looked pictures here and people have so nice computers.After that i looked inside my case and terrible"snake nest" there, wires all over the case.So i started to do something for that and made wiring again. Now its not perfect but better than before. sadly i didnt take picture before cleaning. but now it looks like this.. few pictures..
    Attachment 218627

    Attachment 218628

    Attachment 218629

    Attachment 218630
    Welcome to Seven Forums Niklu. Great looking rig

    hatehereyes said:
    I have finally gotten the 4 Noctua fans I wanted into my case. All for about $45 today

    Too bad they don't make fans for power supplies so I can replace that one also.
    Sooner or later, I am going to replace the 200mm exhaust fan at the top with possibly 4 92mm or 80mm Noctua fans hopefully.
    Noc'd up! Good going

    A Guy
      My Computer


  5. Posts : 540
    Windows 7 Ultimate 64bit
       #1325

    Terronium 12 said:
    Thanks guys. Although I'm not entirely sure what Bill is up to over there.

    I'm definitely going to cut the tubing to length this time. Not sure how I'm going to fit a 140 rad in the case though, that is unless I go for a thin low profile one.
    Ok you ready for this....lol

    If you do not use your Hotswap bays, Take out the four screws that hold the Power/Sata connectors and remove them (the whole metal piece). Now just move your XSPC pump/res down into the Hotswap bays, Then move dvd/cd drive and Fan controller down two spots each, This leaves your top two 5.25 bays open. Now turn you 360 rad around so that the intake/outtake's are in the 5.25 bays, this should now leave you just enough room to put your 140 rad + one push/pull fan at your rear exhaust (where your rear fan is now) .
    Last edited by jeepmann4x4; 28 Jun 2012 at 04:24. Reason: move two spots, not one
      My Computer


  6. Posts : 3,118
    Win7 Home Premium x64 SP1
       #1326

    Niklu said:
    Hello :) I looked pictures here and people have so nice computers.After that i looked inside my case and terrible"snake nest" there, wires all over the case.So i started to do something for that and made wiring again. Now its not perfect but better than before. sadly i didnt take picture before cleaning. but now it looks like this.. few pictures..
    Attachment 218627

    Attachment 218628

    Attachment 218629

    Attachment 218630
    lookin good Niklu nce tidy cables make a world of difference enit.
    the g19 is a good board enit
    nice to see another RAT user what do u think of it? i cant fault mine in any way. really cumfy and tracks really well. my favourite mouse so far
      My Computer


  7. Posts : 545
    Windows 10 Technical Preview - x64
       #1327

    jeepmann4x4 said:
    Ok you ready for this....lol

    If you do not use your Hotswap bays, Take out the four screws that hold the Power/Sata connectors and remove them (the whole metal piece). Now just move your XSPC pump/res down into the Hotswap bays, Then move dvd/cd drive and Fan controller down one spot each, This leaves your top two 5.25 bays open. Now turn you 360 rad around so that the intake/outtake's are in the 5.25 bays, this should now leave you just enough room to put your 140 rad + one push/pull fan at your rear exhaust (where your rear fan is now) .
    That's...quite a good idea.

    Just so I have this straight it'd be pump/res > Rasa > 360 > 140 > pump/res?

    Oh wow another RAT user? I've a 7 that's been tucked away because it stopped working and then started working again...
      My Computer


  8. Posts : 1,438
    64bit Windows 10
       #1328

    PLEASE NO, it's res,pump, allways res before pump.
      My Computer


  9. Posts : 93
    windows home premium 64bit
       #1329

    essenbe said:
    Niklu, nice looking rig. that D14 didn't give the 690 much room did it. On my last rig, my D14 wouldn't let me put my card in the top X16 slot, I had to put it in the second slot. Nice job. Good looking rig.
    Hello Essenbe i have my card in top slot, not much space there,but enough :)

    ganjiry Yes i like R.a.t mouse too. i had first r.a.t3 but sidebutton went broken "hard playing" then i bought razer naga and it doesnt fit my hands very well,, so i bought r.a.t 7 and now its good to play battlefield :)

    Terronium 12 I see that 690 is what u have to have

    A Guy Thank you for welcoming me in seven forums and thanks all for positive feedback
      My Computer


  10. Posts : 4
    Windows 7 Home Premium x64
       #1330

      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 15:09.
Find Us