if you are familiar with the phantom than u know it hax fan adjustments on the top. i have not taken a whole lot of time to test it out, but i belive the inputs for the fans that connect directly to the fan adjustment are slightly larger than your standard mobo fan connection. i plan on purchaseing about 80-90 dollars worth of fans so i want to make sure it will plug in to the fan speed adjustment panel on top.
the cables to the fan controller are really long any way, and if you cut the pre bundled cable ties off you can route them any way you choose.
thank you, but i would like to put the 2 230mm fans on top like specified because id like to be able to see them. and i am not praticularly fond of drilling new holes in cases. anyways. do you know if the xigmatec fans are able to connect to the phantoms fan control? the fan control inputs are an odd size in my opinion, they are only 2 pin and are about 1.5-2x the mobo fan input size and have a completly different latch system, ihave no clue if the xigmatecs where ment to plug into mobo/molex or whatever fan input this is/molex
Quote