New
#61
Thanks all :)
Very pleased with everything thus far.
Think Im done tweaking for now. Time to clean up the wiring a bit, and install everything.
Thanks all :)
Very pleased with everything thus far.
Think Im done tweaking for now. Time to clean up the wiring a bit, and install everything.
Great build and I'm sure you will get much enjoyment from it.
Thanks everyone :) Much appreciated.
I must admit, the stock cooling on the 600T was (IMHO) very underwhelming.
For example, the dual 120mm Xigmatechs on top, exahaust more ait at 50-60% fan speed then the stock 200mm. And quieter as well.
Same for the 120mm Sickle flow on the rear exhaust, & especially true for the front intake.
The intake is a 200mm Coolermaster Megaflow, but its 30mm thick vs the Stock 200mm thats 20mm thick.
So anyone interested in a similar case and want to replace that fan as I did, bear in mind the MegaFlow will not fit with the first HD cage siiting there.
So you must either mod the case, or remove that HD cage.
I also used the stock 120mm fan and mounted it to blow towards GPU/SB heatsink.
But, its certainly worth doing :) The cooling is much,much better.
System and Vregs stay nice and cool, 34C idle and the GPU sits at 36-37 idle.
HDs now stay in the Mid to low 30s as well.
Big difference from the stock fans.