Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: failsafe settings - sabertooth p67 and 2500k

10 Jan 2012   #1
ferjero989

Windows 8.1 Pro 64bit
 
 
failsafe settings - sabertooth p67 and 2500k

i want to reach 4.5ghz... theres plenty guides but im pretty sure some1 already did it with this same board .. so how bout spoiling the fun of figuring out and post your BIOS settings?
i ran prime with some settings and i got 0x101 so i guess im doing something wrong.


My System SpecsSystem Spec
.
10 Jan 2012   #2
badger906

Windows 7 Ultimate x64, & Mac OS X 10.9.2
 
 

not all CPU's are identical, and not all can be overclocked to the same speed using the same settings, thats why theres not an overclockers manual or cheat sheet :)

ive had 2 identical cpus and one wouldnt go a single mhz over its stock speed :) the other would easily oc
My System SpecsSystem Spec
10 Jan 2012   #3
simmo

Windows 7 Professional 64 bit
 
 

Copying someone else's settings is not a clever idea. There is no garantuee it will work on your CPU/Mobo/Ram set up whatever that is.

If you have no idea what your doing then you need to learn what needs to be done and then do it yourself. A 2500k should reach 4.5ghz easily some hit 5ghz no problems but it depends on which CPU you get. Guys I know on OCAU buy CPU's in multiples and overclock each one til they get the best of the lot. Mind you they have more money than I.
Not sure the Sabretooth is a good board to overclock with anyway and it can depend on what board you have and what ram your using plus last but not least what cooling your using.
I can't help you with Bios settings anyway sorry as I'm still using a X58 based rig and have absolutely no intention of sidegrading to the new Intel chips. The X79 is pretty ordinary in fact. The 2500/2600k's are nice overclockers I hear but I have no personal hands on with them.

Google is your friend. I'm sure if you look you will find some settings somewhere that may give you somewhere to start. Trouble is if you do use someone else's settings and it crashes how will you know where to start looking so you can rectify it.

My advice is do it yourself..slooowly.
My System SpecsSystem Spec
.

11 Jan 2012   #4
Wishmaster

Windows 7 Home Premium 64bit
 
 

Keep it simple.

What may work is set you RAM to its rated Speed/timings/voltages and test it with Memtest before you do anything. Make sure its good.

If thats OK, set the CPU multi to 45, set vCore to 1.3v. Most should be able to run at 4.5 here. If yours wont, increase a little at a time until stable.
If its OK at those voltages, then start lowering it and testing until you find the lowest stable vcore.

You may also want to set VDroop to "Without vDroop" OR enable Load Calibration.
(whatever your board calls the setting that reduces/eliminates vDroop)





But as mentioned, not all CPUs are the same and your really better off just taking your time and find what your setup likes.
Mine runs at 4.5 with 1.25 Volts. You may need less, a bit more, or a lot more. Theres no way to know.
My System SpecsSystem Spec
12 Jan 2012   #5
ferjero989

Windows 8.1 Pro 64bit
 
 

awww.. ohwell gues im gonna try
My System SpecsSystem Spec
Reply

 failsafe settings - sabertooth p67 and 2500k




Thread Tools




Similar help and support threads
Thread Forum
Z87 Sabertooth SLI Problem
I have never tried SLI before but when I built my new computer I had two Gigabyte GTX550ti's from previous builds. I installed them and finally got them working, not sure what I did but messed around in uefi and it worked. Had problems with a couple of fans and ended up resetting UEFI and now I...
Graphic Cards
Memory for Z87 sabertooth/i1-4770k?
I can't seem to get the memory right for my update build (have changed my mind many times). What I want is; 16gig DDR3 2x8 gig OR 4x4gig. I want to purchase from HERE. Budget $200 to $300 AUD Can I use 2400 or 2133mhz? Do not want to manual overclock (mess with Voltages Etc.) Want to use...
PC Custom Builds and Overclocking
Can only shut down when DVD drive is mounted or in failsafe mode
I have recently purchased an SSD drive (SANDISK Extreme, works like a charm) and along with that a second hdd drive caddy for my old hdd instead of my DVD drive. My laptop is an ASUS K53sv with i7 2630QM Processor ASUS - Notebooks- ASUS K53SV Both SSD and old hdd in drive caddy works...
General Discussion
i5 2500k or the i7 2600k
Right now I have a 1055t amd x6, I'm actually selling my computer and going to do a new build and I wanted to try intel... I do a bit of video editing here and there, but my 1055t was just fine for that, is the extra 100 dollars worth for the 2600k if i mainly do gaming and a bit of video editing?...
Hardware & Devices
How do I uninstall "Phenoix FailSafe" ?
It came pre-installed on my Samsung R580. It basically is a program that will lock your laptop when "suspiciously" shut-down or restarted. It is so annoying because it happens to me whenever I just want to reboot my laptop after an installation. I have to go on my iPod to the FailSafe's website,...
Software


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:22.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App