Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: G Skill Ripjaws F3-10666CL9S-4GBRL 4GB DDR3 (1333MHz,Cas 9) timings ?

20 Feb 2012   #11

win 7 pro x64

It's the jedac timings, that I used to set the bios with..
double checked and that is also the settings in my bios.

My System SpecsSystem Spec

 G Skill Ripjaws F3-10666CL9S-4GBRL 4GB DDR3 (1333MHz,Cas 9) timings ?

Thread Tools

Similar help and support threads
Thread Forum
G.Skill DDR3 16g Ram Install DRAM 665MHz HELP
Hello. I recently installed 4 new G.Skill RipJaw sticks totaling 16g, This was an upgrade from 10g. The DRAM frequency is at 665 MHz currently. The PC is an HP P6531P with a Foxconn 2A92 MB and a AMD Athlon II x4 635 Processor. Everything is installed correctly and the newest BIOS update is...
Hardware & Devices
will Asus Z87 Pro mobo suport 32GB G.Skill DDR3 P 2.4Ghz Quad Chanel??
will Asus Z87 Pro mobo suport 32GB G.Skill DDR3 P 2.4Ghz Quad Chanel?? I am building Ultimate Gaming-Workstation for myself I am little confuse bz on official ASUS z87 specification they mentioned only ""Dual Channel Memory Architecture...
General Discussion
Would RAM DDR3 1600MHz 1.65v run on 1333MHz 1.5V slot ?
Hi, as the title says my motherboard is a bit old which is ASRock G41C-S and its maximum support of RAM front side bus is 1333MHz, so i'm running 4GB of ram with two different modules one is A-Data 2GB DDR3 1333MHz and another is Apacer 2GB DDR3 1333MHz and i've ran them together for a year without...
Hardware & Devices
My ripjaws 4gb ddr3 rated only 5.9 in WEI? whats wrong?
here is my system Windows 7 Ultimate x64 SP1 AMD TRINITY A10-5800K GIGABYTE GA-F2A75M-D3H RIPJAWS-X 4GB 1600Mhz SAPPHIRE HD 6670 1GB GDDR5 128BIT GENERIC 600w PSU **RUNNING IN DUAL GRAPHICS MODE(AMD RADEON HD 7660D + 6670 Dual Graphics)
Hardware & Devices
Help needed with G.Skill ram timings to get all or most of their speed
Hello, I'm new to ram overclocking and could use some help and advice. My MSI mobo model #890FXA-GD70 is capable of DDR3 ram to 2133mhz. I had been running Corsair 1333 and recently replaced with 4x4gb G.Skill Rigjaws Z Series. Model F3-17000CL11Q-16GBZL DDR3-2133 PC3-1700 CL11-11-11-30 1.6...
PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:30.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App