Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Manual OC or AI Suite on ASUS P8P67-M PRO

08 Feb 2012   #1

Windows 8 x64
Manual OC or AI Suite on ASUS P8P67-M PRO

I have the following board ASUS P8P67-M PRO plus Intel Core i5-2500K 3.30GHz which i bought already overclocked to 4.8ghz as a bundle deal, i started to get BSOD a while back so took PC back and after ten days testing they told me it was a faulty power supply, which i replaced got PC and all was find, but the a couple of days ago i started to get random BSOD & system crashes, i have posted my dump files and it been analysed and put down to un stable over clock, so now i just want to down clock to something more stable and wondered what would be best, manual OC or using AI Suite and doing on the fly through windows?

is there anyone with the same board that as a stable OC that doesn't might posting there bios settings here?

My System SpecsSystem Spec
10 Feb 2012   #2
Layback Bear

Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

I never did have any luck doing any clocking except using bios with Asus Express Gate.
My System SpecsSystem Spec
10 Feb 2012   #3

Windows 8 x64

Quote   Quote: Originally Posted by Layback Bear View Post
I never did have any luck doing any clocking except using bios with Asus Express Gate.
make that two us now, tried to copy something that some one posted on another site with no joy, it seems i had i faulty board & cpu, all is well again for now...LOL
My System SpecsSystem Spec

12 Feb 2012   #4

Windows 7 Professional 64 bit

Copying someone elses settings is no garantee..all boards/cpu's etc will clock differently.

Best way to overclock is to do it in BIOS. It allows far greater fine tuning than using manuf supplied overclocking suites.
My System SpecsSystem Spec
14 Feb 2012   #5

Windows 10 Pro. EFI boot partition, full EFI boot

Manual and make sure you have read up enough to know what you are doing. A lot of the auto overclocks raise voltages too high IME, but some of MB autos nowadays are claimed to do better. Myself I read up on the board and chip and when I fully understand the safe limits, then I manually overclock. You then have to experiment to see where your specific CPU is stable - within the limits of the chip. And don't trust what the operating voltage limits are from Internet posts. Look at the Intel/AMD chip specification documents. Trust me, the school of hard knocks can be expensive.
My System SpecsSystem Spec
14 Feb 2012   #6

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2

Listen to GeneO.

I used the automatic overclock on my ASUS P8Z68-V Pro and it got me to about 4300MHz on my (stock 3400MHz) 2600K. It also ran my CPU voltage up to 1.58.

When I set everything manually I was able to hit ~4700MHz (stable) with the voltage at 1.37. You can imagine the corresponding lowering in my temperatures at the lower voltage, too.

Also, I never had any luck at all with the ASUS AI Suite. It took a lot of massaging to get it to install and it didn't get me very far at all. I'll admit that I didn't mess with it long enough to really try it out, but for me it just wasn't worth it. Others may have better luck than I did, though. :)
My System SpecsSystem Spec
15 Feb 2012   #7

Windows 7 64 Home Premium

As everyone else has stated, if you can help it, do it manually. But research your motherboard and ram etc, to see what you can do with it. As its been said already, the programs aren't really the best and can damage your components.
My System SpecsSystem Spec

 Manual OC or AI Suite on ASUS P8P67-M PRO

Thread Tools

Similar help and support threads
Thread Forum
No Operating System Asus Motherboard P8P67
Helping a friend who has an auto update of drivers. After which no operating system found. Win 7 64 bit, Asus Motherboard P8P67, made by Novatech. I believe that the SATA drivers are the problem. I have repair disk and original driver disk. When I run repair disk, no operating system is...
Asus P8P67 Deluxe very wierd behavior
I had my mobo for 1 week now. I've updated the bios to latest, set power on by ps/2 KB is set. But. After that being set. Powering the pc on won't work. My psu is able to supply 3A on +5vsb rail. Next observation. After shutting down win7. Pc seems to be shutted down. But cpu fan and pwmfans...
Hardware & Devices
Keyboard-now you see it, now you don't-ASUS P8P67
I've concluded there is some issue linking the PS/2 port and the BIOS..........and it needs sorting, please! I've just put together the following: i5-2500K, Asus P8P67, 4 gb Corsair XMS RAM, Gigabyte ATI 6950 - all costing quite a bit of money and yet the whole sherbang is being let down by a...
Hardware & Devices
Using SSD for OS with ASUS P8P67 MB
My computer contains: ASUS P8P67 MB Intel i5 2500 CPU 16GB Corsair RAM 3 WD Black 1TB SATA III HDDs, two configured as RAID1 for data and one for OS LG Blu-ray burner LG DVD RW drive Media card reader Windows 7 Professional 64-bit OS
Installation & Setup
2 devices (HD and DVD drive) suddenly disappeared (Asus P8P67 B2)
Hi, While I was working with 2 of my drives (SSD (system) and one other HD), both connected to the Intel SATA6 ports, 2 other hard drives disappeared. Some folders from one of these drives were open and suddenly closed. That's how I noticed both of these devices were missing. Coincidently, the...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:17.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App