Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: AMD X6 1090T More Overclocking Adventures! BSOD's

30 Mar 2012   #51

Windows 7 64 bit

Quote   Quote: Originally Posted by Britton30 View Post
Those are very good MaxxMem scores on a AMD system!
Can't recommend these Crucial tactical tracers enough, No issues at all, they were listed on crucial's site as being compatible and I have to say they certainly are.

They are rated at 1600Mhz 8-8-8-24-36 *2T* but at only 1.5V to help out intel users.

So to get nearly 1800Mhz 8-8-8-24-36 )*1T at 1.66V is pretty good.

Am sure that they may have more, they probably just about missed the 1866Mhz binning process! LOL

My System SpecsSystem Spec
03 Apr 2012   #52

Windows 7 Ultimate (x64) SP1

I agree...Crucial is great
My System SpecsSystem Spec
03 Apr 2012   #53

Windows 7 64 bit

They do an 1866Mhz version too that will probably get you close to 2000Mhz.

I thought it was overkill on the 1090T though and hearing that some struggled to get 1600, I was conservative, I really don't believe that any thing higher than I am running would provide anything significant on the 1090T however, not with this board, although it is rated to run 2000Mhz when overclocked.
My System SpecsSystem Spec

03 Apr 2012   #54

Windows 7 64 bit

So my thermal paste application seems to have settled down over the last week or so, I reapplied paste to the heatsink on the special fan/heatsink that is fitted to my GTX 470 SOC also.

The MX4 on the GTX470 has reduced idle temps by 4-6 C

Net results are below:

Attached Thumbnails
AMD X6 1090T More Overclocking Adventures! BSOD's-idle-temps.jpg  
My System SpecsSystem Spec
04 Apr 2012   #55

Windows 7 64 bit

I thought I would treat myself to another overclocking session.

I have worked some good information out about this board at least.

I set the overvoltage jumper on the motherboard as max without it was 1.55V (BIOS setting) Actual 1.408-1.42V under load Vcore.

The CPU VID was'nt showing up in AIDA 64 until I set this Jumper, now it shows up just fine, and it lets you into the secret of this board and its V droop.

Set 1.6V in BIOS and you get 1.5V CPU VID in AIDA 64. exactly 0.1V less than set value.

Ok, because the chip is not BSODing when it is above 4Ghz, there is only one thing that i can deduce, and it is this, Intel Burn Test is well known for maxing out the CPU and getting it hotter than any other software, included, in my experience, Prime 95, I find that even a four hour run of Prime 95 will result in temperatures around 5-7C lower than Intel Burn Test produces when running the tests higher than standard.

So I am pretty sure that its basically temperatures that are holding this CPU back now, Pretty much as soon as Core Temp exceeds 55C Intel Burn Test fails.

I have however given it a little further push:

OK, 4.02GHZ Nice and stable.

CPU: 4.02Ghz @ 1.45V (Vcore under load) 1.575V (BIOS) 1.475V (CPU VID) AMD X6 1090T Thuban Black Edition
Multi: X18

CPU/NB: 3128Mhz @ 1.45V (Auto in BIOS)
Multi: X14

HT: 223Mhz (222 BIOS)

HT link: 2230Mhz
Multi: X10

RAM: 1786Mhz (1.66V) (AUTO in BIOS) @ 8-8-8-24-36 1T 2x4GB (8GB) Crucial Tactical Tracers (1600Mhz rated)

Attached Thumbnails
AMD X6 1090T More Overclocking Adventures! BSOD's-m4n98td-evo-4.02ghz-1.jpg   AMD X6 1090T More Overclocking Adventures! BSOD's-m4n98td-evo-4.02.jpg  
My System SpecsSystem Spec

 AMD X6 1090T More Overclocking Adventures! BSOD's

Thread Tools

Similar help and support threads
Thread Forum
Overclocking Phenom II X6 1090T
Hey guys. Could someone with experience in overclocking an AMD Phenom II X6 CPU help me achieve a target overclock of 4.2GHz - 4.4GHz please? I have a video uploading of my attempt to which failed miserably with a BSOD when I got into Windows and opened up HWInfo/HWMonitor and CPU-Z. :/ Mobo:...
PC Custom Builds and Overclocking
Windows 7 64 Bit ASUS M4N98TD EVO AMD X6 1090T GTX 470 BSOD
About three months ago I upgraded to this Motherboard (M4N98TD Evo) as my previous motherboard died (M4N72-E), The transition seemed to go very smoothly apart from the fact that I am still struggling for absolute stability. I know what my old board was capable of running these components at and...
BSOD Help and Support
Adventures With Firefox
As most of you know from my previous posts, I recently switched to Firefox and it is pretty good. I was able to import my Bookmarks OK, but now I have a new site I want to add. In Internet Explorer I would click on the Favorites and there was a place at the top for "Add to Favorites". I then...
Browsers & Mail
Amd x6 1090t further overclocking adventures
Did some posts on here regarding my overclocking of my computer. Previously I have had an Athlon X4 and a Phenom X4. Just purchased an AMD Phenom II X6 1090T 3.2 Ghz, I am very happy with it indeed. In no time I have found a nice overclock that I am happy with and that has tested as...
PC Custom Builds and Overclocking
The Solo Adventures 3D
Thought this was a pretty nice little animation. The Solo Adventures 3D on Vimeo Enjoy.
Chillout Room

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:21.
Twitter Facebook Google+