New
#1
NEW Memory - Higher Speed - Overclock Setting Changes needed
I purchased new memory for my computer and need assistance with making changes to get the memory frequency upto 2133. Below are all my current BIOS settings. Any help (changes) , even in other parts, would be appreciated.
CPU Clock Ratio [21x]
CPU Frequency: 3.8GHz (181x21)
Advanced CPU Features
CPU Clock Ratio [21x]
CPU Frequency: 3.8GHz (181x21)
Intel(R) Turbo Boost Tech [Enabled]
CPU Cores Enabled [All]
CPU Multi-Threading [Enabled]
CPU Enhanced Halt (C1E) [Enabled]
C3/C6/C7 State Support [Enabled]
CPU Thermal Monitor [Enabled]
CPU EIST Function [Enabled]
Virtualization Technology [Enabled]
Bi-Directional PROCHOT [Enabled]
Virtualization Technology [Enabled]
QPI Link Ratio [x36]
QPI Link Speed [6.51GHz]
Uncore & QPI Features
QPI Clock Ratio [x36]
QPI Link Speed: 6.51GHz
Uncore Clock Ratio [x20]
Uncore Frequency 3620MHz
Isonchronous Frequency [Enabled]
Base Clock (BCLK) Control [Enabled]
BCLK Frequency (MHz) [181]
Advanced Clock Control
>>>>> Standard Clock Control
Base Clock (BCLK) Control [Enabled]
BCLK Frequency (MHz) [181]
PCI Express Frequency (MHz) [100]
C.I.A.2 [Disabled]
>>>>> Advanced Clock Control
CPU Clock Drive [700mV]
PCI Express Clock Drive [700mV]
CPU Clock Skew [ 0ps]
IOH Clock Skew [ 0ps]
Performance Enhance [Turbo]
Extreme Memory Profile (X.M.P.) [Profile2]
System Memory Multiplier (SPD) [10.0]
Memory Frequency (MHz) [2133] [1810]
DRAM Timing Selectable (SPD) [Auto]
Profile DDR Voltage 1.65V
Profile QPI Voltage 1.05V
Channel A
CAS Latency Time [9] [A]
tRCD [10] [A]
tRP [11] [A]
tRAS [28] [A]
Command Rate (CMD) [2] [A]
Channel B
CAS Latency Time [9] [A]
tRCD [10] [A]
tRP [11] [A]
tRAS [28] [A]
Command Rate (CMD) [2] [A]
Channel C
CAS Latency Time [9] [A]
tRCD [10] [A]
tRP [11] [A]
tRAS [28] [A]
Command Rate (CMD) [2] [A] ]
Advanced DRAM Features
Performance Enhance [Turbo]
Extreme Memory Profile (X.M.P.) [Profile2]
System Memory Multiplier (SPD) [10.0]
Memory Frequency (MHz) [2133] [1810]
DRAM Timing Selectable (SPD) [Auto]
Profile DDR Voltage 1.65V
Profile QPI Voltage 1.05V
x Channel Interleaving 6 Auto
x Rank Interleaving 4 Auto
Load Line Calibration [Enabled]
CPU Vcore 1.23750v [1.2750v]
QPI/VTT Voltage 1.175v [1.295v]
IOH Core 1.100v [Auto]
DRAM Voltage 1.500v [1.640V]
Advanced Voltage Control
Load Line Calibration [Enabled]
CPU Vcore 1.23750v [1.2750v]
x Dynamic Vcore (DVID) +0.0000V
QPI/VTT Voltage 1.175v [1.295v]
CPU PLL 1.800v [1.600V]
>>> MCH/ICH
PCIE 1.500v [Auto]
QPI PLL 1.100v [Auto]
IOH Core 1.100v [Auto]
ICH I/O 1.500v [Auto]
ICH Core 1.100v [Auto]
>>> DRAM
DRAM Voltage 1.500v [1.640V]
DRAM Termination 0.750v [Auto]
Ch-A Data VRef. 0.750v [Auto]
Ch-B Data VRef. 0.750v [Auto]
Ch-C Data VRef. 0.750v [Auto]
Ch-A Address VRef. 0.750v [Auto]
Ch-B Address VRef. 0.750v [Auto]
Ch-C Address VRef. 0.750v [Auto]
Last edited by JFC15; 31 Mar 2012 at 21:42. Reason: Made changes - currently stable