New
#11
That is very unusual. Off the top of my head I can't come up with a reason but I will investigate. Nice result tho.
Update: Just a thought...is your command rate (1T/2T) set to Auto?
2t auto makes no difference can't change it and it doesnt have a command rate option which i should of noticed before well what can i do i re ran my test and i got better timmings
First the old one Second the new one
Scores went down and i was on IDE with better Numbers when i went back to Achi it went down wierd
Well ran it a few times went to normal maybe it was just me
Last edited by Solarstarshines; 05 Apr 2012 at 18:31.
I usually get a little different number every time I run it. It may depend on what's going on in the background.
Sounds like you did it the easy way
Looks good.
What settings did they have you change?
FSB: 233MHz
RAM multi: 1:4
RAM timings, nice and tight
Command Rate: 2T
NB Frequency: 2796MHz
DRAM voltage?
CPU IMC voltage?
What did you test with?
memtest86+ hopefully.
@essenbe
Good advice.
Dave,
Sounds like you are the right guy to speak with.
233x17.5 = 4.07 Ghz
Dram Freq. = 1864
CPU-NB Freq. = 2796
Dram Ratio = 1:4
CPU Volt. = 1.445
CPU-NB Volt. 1.220
Dram Volt. = 1.6
Advanced Dram Config.
CAS = 9 CLK
tRCD = 10 CLK
tRP = 9 CLK
tRAS = 28 CLK
2T
Did you have your CPU OC'ed before the new RAM?
Settings all look good, did they just give you the RAM timings or did you work them down?
Have you tried lowering the CPU voltage?
Cool and Quiet enabled?
OC'ing is so much fun, going to have to give mine another run soon...
Yes had the quad over clocked to 4.2 but had to roll that back to 4.077. I have brought the voltage down to 1.425 and everything is stable and happy. The timings they gave me and I have joined the forum there and will investigate further tightening over time, no rush.