Can anyone assist with my memory and CPU-Z readings


  1. Posts : 24
    Windows 7 Ultimate x86
       #1

    Can anyone assist with my memory and CPU-Z readings


    Hi all,

    Im currently running CPU-z, speedfan and core temp. Ive added a screenie of CPU-z.



    Am i getting this wrong or is there a problem. BIOS says that it is set to run at 1333mhz at 9-9-9-24 @ 1.500v not 533.3mhz 8-8-8-20 as CPU-z says

    Thanks
      My Computer


  2. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #2

    running at 1066 did you check XMP on the mem sticks that might be your issues

    Some boards you can simply change it to the rated speed others might need some work to make it happen ussually overclocking will set it right but should be set correctly if the board supports that speed
      My Computer


  3. Posts : 24
    Windows 7 Ultimate x86
    Thread Starter
       #3

    Just gone back into BIOS, dunno if its anything to do with XMP as you mentioned as im new to all this stuff but i changed the MCH freq latch to 200mhz and the SPD to 4.00 and its sorted it.

    So thank you :)

      My Computer


  4. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #4

    yup you used XMP which allows you to either bring your ram to rated speed or clock it further Xtreme memory profile

    You just had to adjust the timings which was very easy for you ,that's awesome there are some threads you might want to check out for future use

    Overclocking setting tighter ram timmings etc Tutorials - Windows 7 Forums=
      My Computer


  5. Posts : 24
    Windows 7 Ultimate x86
    Thread Starter
       #5

    Thank you, ill take a look.

    It was a little weird, it was set at 333mhz which ran at 1066 and at 266mhz it was even lower, but its done now

    Thank you very much, now i can look into doing cpu and maybe gpu if i can
      My Computer


  6. Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       #6

    Good luck and be carefull with Overclocking andmake sure to have good cooling because things tend to heat up
      My Computer


  7. Posts : 24
    Windows 7 Ultimate x86
    Thread Starter
       #7

    Will do, im hoping to get water cooling but will have to wait till after i get married in june.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:32.
Find Us