Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

22 Mar 2012   #1541
GeneO

Windows 10 Pro. EFI boot partition, full EFI boot
 
 

Ten hours is a bit extreme IMO. There are a lot of low voltage unstable posts out there, but I give the benefit of the doubt - I have a stable 4.5 GHz at the same voltage.


My System SpecsSystem Spec
.
23 Mar 2012   #1542
JoeDavola

Windows 7 Professional 64
 
 

Quote   Quote: Originally Posted by GeneO View Post
Ten hours is a bit extreme IMO. There are a lot of low voltage unstable posts out there, but I give the benefit of the doubt - I have a stable 4.5 GHz at the same voltage.
Agree, I did 3 hours of prime with my 4.8 OC and 10 runs of Intel Burn test at max ram.
I've never had a BSOD with a game or Photoshop, so to me there is no point in running some ridiculously long prime test.
My System SpecsSystem Spec
27 Mar 2012   #1543
tw33k

Windows 7 Ultimate (x64) SP1
 
 

Got to 4.5 quite easily. My chip doesn't like the FSB much higher but I think I can get more out of it. Very pleased with this chip.



CPU-Z

I haven't even tweaked the RAM yet.


I thought my old 1090T was holding me back.
My System SpecsSystem Spec
.

27 Mar 2012   #1544
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Good so far Mark! I suspect with some tw33king you'll get good RAM performance too.
My System SpecsSystem Spec
27 Mar 2012   #1545
tw33k

Windows 7 Ultimate (x64) SP1
 
 

RAM performance is already good. I tightened the timings a little and broke 12GB/sec. Pretty good for an AMD rig
My System SpecsSystem Spec
27 Mar 2012   #1546
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Real good for AMD!
My System SpecsSystem Spec
27 Mar 2012   #1547
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

nice job tw33K. well done.
My System SpecsSystem Spec
27 Mar 2012   #1548
tw33k

Windows 7 Ultimate (x64) SP1
 
 

Thanks guys.

Got it to 4.8GHz but couldn't run Cinebench. I'll stick with 4.5GHz for now. The NB doesn't like going higher than 2640MHz but I doubt it would increase performance anyway.
My System SpecsSystem Spec
27 Mar 2012   #1549
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Someone's having fun!

A Guy
My System SpecsSystem Spec
27 Mar 2012   #1550
tw33k

Windows 7 Ultimate (x64) SP1
 
 

lol...I'm done for a while. I want to use it for a couple days to see how it goes.
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 05:51.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App