Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

30 Mar 2012   #1561
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by tw33k View Post
Quote   Quote: Originally Posted by Solarstarshines View Post

Are you not use-ing Watercooling ?

That's the first thing i did when i got the chip i switched to a WaterBlock

Also reading about these chips voltages varies but can be chured up to 2.0 V-core
The Boards that saw the Best OC was Fomula IV Boards and Gigabyte 990ufd

My board have a highest v-core of 1.49 I can't go any higher even with the C1E C6 turbo core etc turned off

Im running MSI 990fx GD-80 which is doing the job

To compemsate for the Power draw i got the AX850 which helped my Crossfire set up as well and everything is Buttery smooth i do have this clip of a bench i took last night at these setting on Unigene 3.0 I havn't tryed at my normal resolution though or 1920/1080

also clocks were 920/1130 920/1130 i just leveled it out at 920/1125 diamond card 6870 Msi card 920/1120 The 1120 is stock when you go higher it freezes the bench that is why i left it but the diamond runs well off the higher clock speeds also use-ing the 12.3 CCC Not a single issue like others have been reporting
I still don't like the idea of liquid cooling yet. I've got a Phanteks PH-TC14PE with a UK-3000 and an AP-121 in push/pull. Under load the max core temp hit 47c and averaged 45c. Pretty good. I'm going to add a fan to the right side aimed at the back of the CPU. That will help.

I wound the FSB down to 200 and upped the multi to 22.5 to keep 4.5GHz. That allowed me to drop the voltage down a touch but it's still at 1.5v. I tried all the LLC options and having it disabled is the best option.
That will probally be your most stable overclock but if you bring the ram down you could up the multiplyer and get a stable 4.7 with out really Oc'ing the ram

I seen when i used the chip Multiplyer and didnt fiddle with the FSB or SB NB settings the memory increased on it's own due to a better memory controller on this cpu mine went from 7.5 to 7.8 off the Overclock I found that pretty Impressive


My System SpecsSystem Spec
.
31 Mar 2012   #1562
tw33k

Windows 7 Ultimate (x64) SP1
 
 

My chip needs too much voltage past 4.5GHz. After comparing all my results, this is these are the best settings. This chip is fun to OC. It's not like my old 1090T

Post Your Overclock!-maxxmem_1760.png Post Your Overclock!-cpuz_4500.png


My System SpecsSystem Spec
31 Mar 2012   #1563
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

That looks great Mark. Good RAM numbers with a 1760 speed, very good.
My System SpecsSystem Spec
.

01 Apr 2012   #1564
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Quote   Quote: Originally Posted by tw33k View Post
My chip needs too much voltage past 4.5GHz. After comparing all my results, this is these are the best settings. This chip is fun to OC. It's not like my old 1090T

Attachment 205213 Attachment 205215
Good grief that Voltage is pretty High did you happen to see what revision or serial number of the CPU some of them varies in voltage when tweeking
My System SpecsSystem Spec
01 Apr 2012   #1565
tw33k

Windows 7 Ultimate (x64) SP1
 
 

Most 8150s need 1.5 for over 4.5GHz. I've dropped the voltages since then...look again. Some get lucky and can run it at 1.4...just not me. It's not like it's causing problem heat wise. My cooling system keeps it at 45c under load so I'm not worried

Quote   Quote: Originally Posted by Britton30 View Post
That looks great Mark. Good RAM numbers with a 1760 speed, very good.
Thanks mate
My System SpecsSystem Spec
02 Apr 2012   #1566
paulpicks21

Windows 7 Professional 64 bit
 
 

This appears to be the best results I can get from my ram, it will clock higher but the results do not increase.

It's a mild OC, but I managed to tighten the timings a little on top of the OC.

Paul.


Attached Images
Post Your Overclock!-maxx.png 
My System SpecsSystem Spec
02 Apr 2012   #1567
tw33k

Windows 7 Ultimate (x64) SP1
 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
This appears to be the best results I can get from my ram, it will clock higher but the results do not increase.

It's a mild OC, but I managed to tighten the timings a little on top of the OC.

Paul.
Damn Intel guys and their high numbers...lol.
My System SpecsSystem Spec
02 Apr 2012   #1568
paulpicks21

Windows 7 Professional 64 bit
 
 

Lol, Just for you then tw33k my AMD rig


Attached Images
Post Your Overclock!-amd.png 
My System SpecsSystem Spec
02 Apr 2012   #1569
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Paul, even the picture looks brighter on your Intel rig. The AMD one is rather dark and dreary.
My System SpecsSystem Spec
02 Apr 2012   #1570
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

I can't do as well as Paul, but here's the best I have done so far, but I haven't played with it.

Post Your Overclock!-2133-max-mem.jpg

Post Your Overclock!-2133-best.jpg


My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
Should I overclock my CPU?
Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
PC Custom Builds and Overclocking
odd post/bios screen, plus no keyboard detected @ post
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
General Discussion
Cant seem to get an overclock
Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:54.
Twitter Facebook Google+