Here's my system monitor gadget that works with core temp.
I can not get that gadget to work for crap!! I downloaded that Dev's. whole lot and everything else works great but that one.
I try to install, it goes through the process but doesn't show up on desktop or in the gadget gallery!
Computer Type: PC/Desktop System Manufacturer/Model Number: Jeepmann/Custom Built OS: Windows 7 Ultimate 64bit CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (@4.5Ghz@1.230v) Motherboard: Asus Maximus IV Extreme LGA 1155 Intel P67 Memory: G.SKILL Ripjaws X Series 16GB 1600Mhz (4 x 4GB) (Stock) Graphics Card: x2 EVGA GeForce GTX 760's w/ACXCoolers in SLI Surround Sound Card: On-Board Monitor(s) Displays: 3x Acer 24" HDMI Widescreen LCD Monitor Screen Resolution: 3@ 1920x1080 (5760x1080 In Surround) Keyboard: Logitech G510 Mouse: Zalman M300 PSU: COOLER MASTER Silent Pro 1000W Case: COOLER MASTER HAF X Black Cooling: CORSAIR Hydro H70 Hard Drives: Samsung 830 128gb ssd
Western Digital Caviar Black 640GB 7200 RPM
Western Digital Caviar Black 500GB 7200 RPM
Seagate 2tb 7200 RPM Internet Speed: 100mbps-ish Down & 5mbps-ish Up Other Info: I installed the stock 140mm case fan outside of case then installed the H70+ 1 of its 120mm fans inside case. Used the 2nd 120mm from the H70 to go in the Gpu tunnel.
230mm Front,200mm side,200mm top,120mm Gpu tunnel,120mm&140mm on H70.
Hello all,
Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load
My question is should I overclock this CPU I have?
specs:
CPU: Intel core i5 650 3.20GHz
Mobo: Intel dq57tm
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard.
a...
Hi
have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please
Thanks