Trinity, put a usb drive in and on any page you should be able to hit F12 and it will put a picture of what you are looking at on the USB drive. Or it could be a chipset thing. The P67 and Z68 boards have it, I dont know about the 'H' chipsets. You don't have a K serise chip or one of those boards, it is understandable that you may not have some of the options.
No problem. The options available depend on the CPU on the board. If you could install say an i5-2500K there would be different options in your UEFI. I ahve another ASUS board with AMD AM3 socket and its options are entirely different than what Intell offers.
OK , thanks for help. Now I need new motherboard, new CPU, new.... Oh never mind.No problem. The options available depend on the CPU on the board. If you could install say an i5-2500K there would be different options in your UEFI. I ahve another ASUS board with AMD AM3 socket and its options are entirely different than what Intell offers.
yeah maybe, if I want to have an auxiliary hot plate for cooking. It did pass IBT with this overclock but got up to 93C!
Hey that's EX-AMD guy.
I can run Prime at 4.6, this was for 5 hours 25 minutes. I did another run for 8 hours overnight with no errors at 4.6, max temp was 76C.
Reached 5.0GHz, film at 11.
Follow the red arrows for the rest of the story, Hyper EVO cooler. Temps are from a 9 second run with IBT. It ran Prime for 7 minutes 14 seconds and produced an error and the temp hit 82C. But I DID hit 5GHz.
I'll hang the kahunas up now.
Great job, Gary. Congrats. Did you have time to get it verified by CPUz? Put it in your sig.
