Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

15 Jun 2012   #1861
Terronium 12

Windows 10 Technical Preview - x64
 
 

Thanks. Same to you and your high temps.

Question: seeing as we're both using Asus boards, would you say a PLL of 1.9v is too high?

Now that that's been edited in (it was actually 1.9 flat), I have to correct something else - the vcore is set to 1.325 and not 1.365.



My System SpecsSystem Spec
.
16 Jun 2012   #1862
smarteyeball

 
 

1.9 would be upper limits - but to lower temps you can actually try lowering it - I currently have mine at 1.6xx which gives me a 1.6 flat. There doesn't seem to be much need to have it so high as there seems to be less OC impact with PLL and SB/IB, unlike older sockets.

Do you have PPU PLL Overdrive (?think it's that. having a brain fart atm. Setting up the top any way) Enabled or disabled? I have mine disabled.

On Sandy, it only needed to be enabled for 4.8Ghz+ OCs - I 'think' the same applies to Ivy, but since most Ivy users are hitting a temp wall, rather than a voltage one it's better off disabled.
My System SpecsSystem Spec
16 Jun 2012   #1863
Terronium 12

Windows 10 Technical Preview - x64
 
 

I have that enabled, yes.
My System SpecsSystem Spec
.

16 Jun 2012   #1864
James7679

Windows 7 Home Premium x64
 
 

Haven't been in this thread in a while. Just got home and decided to crank the base a little and drop my volts to check for stability. Here's the start...
My System SpecsSystem Spec
16 Jun 2012   #1865
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Nice OC, James. Good job.
My System SpecsSystem Spec
16 Jun 2012   #1866
James7679

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by essenbe View Post
Nice OC, James. Good job.
Thank you. Got bored with that one, so here's another. Will leave it running over night.
My System SpecsSystem Spec
16 Jun 2012   #1867
Wishmaster

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by essenbe View Post
My theory on IBT and Prime. If you set your Vcore by IBT you will fail Prime. If you watch the Vcore, When IBT starts it is higher vcore than when Prime starts. They both fluctuate some, but since IBT starts higher it can drop and still pass. Since Prime starts lower, when it drops you fail because it drops too low. You will get much higher temps with IBT, but if you set vcore with prime, you can pass both. I have never been able to pass Prime and fail IBT. It's just too easy to use IBT to set vcore, it finishes so quickly. But, I have passed IBT on max and failed prime. Those high vcores you guys are getting, you won't get in real world apps. At least I didn't with a 3770K, my real world apps were the same temps as my 2600K. I found the 2600K much harder to OC than the 2500K. It will do it, but you have to make it do it.

I'll find out tomorrow when my 3570K is delivered.
Big reason I think IBT is a perfect tool for a fast/general idea if a OC is stable. especially if looking for a max clock.
But when it comes down to the final stability test .. Prime all the way.
My System SpecsSystem Spec
17 Jun 2012   #1868
James7679

Windows 7 Home Premium x64
 
 

Well, P95 went overnight. Temps look good, and no failures. This morning I set the memory multi to 18.66. Been running P95 since. Here are the current standings;



Overall, I am very happy with this considering I am using a budget board not meant for overclocking. I may try to go a little further. I will see how things are in BF3. I have found that BF3 stresses my components better than any of the tests available, when set on ultra.
My System SpecsSystem Spec
17 Jun 2012   #1869
James7679

Windows 7 Home Premium x64
 
 

Validated;
My System SpecsSystem Spec
17 Jun 2012   #1870
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Nice one James, your RAM is at 1882MHz. I suspect you could wring 4800 out of that beast.
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:00.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App