Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

17 Jun 2012   #1871
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Can't let everyone have fun @ 4.6 Ghz so here i am memory bump from 1600mhz to 1840 mhz a little more tweeking i can get 1866 out of these sticks

I need to run a stability test lol so far so good though




Attached Thumbnails
Post Your Overclock!-oc.png  
Attached Images
Post Your Overclock!-mem2.png 
My System SpecsSystem Spec
.
17 Jun 2012   #1872
Layback Bear

Windows 7 Pro. 64/SP-1
 
 

You looking good. Could you post what you temps are under load. Unless I missed it I only see a 2% load.
My System SpecsSystem Spec
17 Jun 2012   #1873
Solarstarshines

Windows 10 Home Premium 64bit sp1
 
 

Well it wasn't stable Cinabench locked up so i will have to be happy with what i got but it was fun trying though

In no way disapointed the ram i have almost clocked to 1866 without having to up the voltage
My System SpecsSystem Spec
.

17 Jun 2012   #1874
A Guy

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x64 SP1
 
 

Quote   Quote: Originally Posted by James7679 View Post
Validated;
Quote   Quote: Originally Posted by Solarstarshines View Post
Can't let everyone have fun @ 4.6 Ghz so here i am memory bump from 1600mhz to 1840 mhz a little more tweeking i can get 1866 out of these sticks

I need to run a stability test lol so far so good though


A Guy
My System SpecsSystem Spec
18 Jun 2012   #1875
Terronium 12

Windows 10 Technical Preview - x64
 
 

Fighting with this thing trying to get it stable with a lower PLL voltage is beginning to annoy me, which is perfectly normal for overclocking. But 1.7935, with the same 1.325 vcore, and a 1v VCCSA nets me about 7-8 hours of P95 activity before it stops responding.

I can't get the VRM Frequency to show me any love, which means more reading needs to be done. As far as PLL goes, I'm not budging from where it's set to in the saved profile that I'll get back to stabilizing in the wee hours of the morning.
My System SpecsSystem Spec
18 Jun 2012   #1876
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

You guys have a head start on me. I just got my 3570K about 3 hours ago. Just getting started, but temps are going to kill me. Maybe time to look at real water. 2 hours of Prime.

Post Your Overclock!-prime.jpg


My System SpecsSystem Spec
18 Jun 2012   #1877
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

that's not too hot Steve and your max temps are within only 3C of each other.
My System SpecsSystem Spec
18 Jun 2012   #1878
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

I know, they're all too hot. But, don't worry, they'll go up. I'm running Prime now at 4.5.
My System SpecsSystem Spec
18 Jun 2012   #1879
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Not sure what happened. prime just crashed. No BSOD or lock ups, Prime just got tired of playing after 2 hours. But, that's OK, it was cutting into my gaming time. Here's what it was at 1.5 hours. I guess I'm going to have to break out the D14 again. Core Temp really has that frequency nailed.

Post Your Overclock!-1.5-hrs.jpg


My System SpecsSystem Spec
18 Jun 2012   #1880
smarteyeball

 
 

Quote   Quote: Originally Posted by Wishmaster View Post
Quote   Quote: Originally Posted by essenbe View Post
My theory on IBT and Prime. If you set your Vcore by IBT you will fail Prime. If you watch the Vcore, When IBT starts it is higher vcore than when Prime starts.
Big reason I think IBT is a perfect tool for a fast/general idea if a OC is stable. especially if looking for a max clock.
But when it comes down to the final stability test .. Prime all the way.
IBT is like 'full throttle' whereas Prime lifts up on the gas every now and then.

It's those transitional power states, vdrops, vdroops etc that are added to Primes mix which do make it the better tool for longevity testing.


Quote   Quote: Originally Posted by Terronium 12 View Post
Fighting with this thing trying to get it stable with a lower PLL voltage is beginning to annoy me, which is perfectly normal for overclocking. But 1.7935, with the same 1.325 vcore, and a 1v VCCSA nets me about 7-8 hours of P95 activity before it stops responding.

I can't get the VRM Frequency to show me any love, which means more reading needs to be done. As far as PLL goes, I'm not budging from where it's set to in the saved profile that I'll get back to stabilizing in the wee hours of the morning.
What level of LLC do you have it on? And what size of FFT is it hanging on do you know? large or small? - If small, it's not enough vcore.

(And I know your frustration mate.)


Quote   Quote: Originally Posted by essenbe View Post
Not sure what happened. prime just crashed. No BSOD or lock ups, Prime just got tired of playing after 2 hours.
Not enough vcore. Sudden quits, appcrash means it's 'in the ballpark', but not quite there.

Also, what version of P95 are you running? The latest is 27.7
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 01:01.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App