Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

07 Jan 2010   #221
skunksmash

SEVEN x64
 
 

Quote   Quote: Originally Posted by Wishmaster View Post
At 400FSB 333/800 Strap and 8GB RAM at 960ish ..

mines showing a little over 8100Mb/s with 5-5-5-12
So far im happy with this as 24/7 OC, as it only needs 1.32NB core :) to be happy
and runs cool.
For my board, past this, with 8GB RAM things start really taking a lot more juice.


Ive seen some get theses Q9650s over 500FSB ... I couldnt with mine regardless how hard i tried to push it though Guess I dont have that "magical" chip

Best I could do was a x8 multi 485 FSB

But with all slots full, 450ish bout all I could manage
And at that it takes a good deal to get stable. Far more than Im comfy with for 24/7.


As far as stress , Im a HUGE fan of IBT. especially when your looking for that FSB wall etc.
5 minutes = something like 8hrs Prime 95 (or so they say)

I know it does tend to find instabilities really fast.
lol....stop it ppl, your making my H/W look worse & worse


My System SpecsSystem Spec
.
07 Jan 2010   #222
grimreaper

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by skunksmash View Post
Quote   Quote: Originally Posted by grimreaper View Post
Quote   Quote: Originally Posted by skunksmash View Post

.....X58 here i come
Amen, same here got it all planned out late this yr just saving $$ like everyone else out there im budgeting pretty large, and to be honest likely the last major upgrade in a long time.

.....i said that last year when i bought the Quad, 8GB of RAM & a GTX260.

WHEN WILL IT END....LOL
NEVER!! Lmao we need a computer assessment ourselves hahaha
My System SpecsSystem Spec
07 Jan 2010   #223
grimreaper

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by skunksmash View Post

lol....stop it ppl, your making my H/W look worse & worse
that was never our intention hehe but i bet when you get your x58 i can just see that smile now ...
My System SpecsSystem Spec
.

07 Jan 2010   #224
skunksmash

SEVEN x64
 
 

Quote   Quote: Originally Posted by grimreaper View Post
Quote   Quote: Originally Posted by skunksmash View Post

lol....stop it ppl, your making my H/W look worse & worse
that was never our intention hehe but i bet when you get your x58 i can just see that smile now ...
lol....i know (keep posting numbers), the more i see, the more fed up i'll get with my current rig
My System SpecsSystem Spec
07 Jan 2010   #225
grimreaper

Windows 7 Ultimate X64
 
 

Quote   Quote: Originally Posted by Wishmaster View Post

Ive seen some get theses Q9650s over 500FSB ... I couldnt with mine regardless how hard i tried to push it though Guess I dont have that "magical" chip
over 500FSB?? wow now i really got to hit up Google
My System SpecsSystem Spec
08 Jan 2010   #226
tranqueirex

dual: windows 7 Ultimate x64 7600 and XP SP3
 
 

Please, beginner need expert consulting and advices on OC

I am not sure if I have to keep memo and ht/nt at stock to get more increase on processor. the question is: does that OC makes sense?
I can go to 3600 if I raise +0.150mV keeping other settings but I prefer to maintain +0.100mV just to avoid the limit I've found
temp is fine under heavy loading 50C - ambient is 30C (very hot)
very stable - prime 95 runs fine 8 hours - gaming is fine for several hours in days.


Proc 2800 -> 3500
200x14 -> 212 x 16.5
+ 0.100mV (1.44mV)

mem 1066 5-5-5 -> 1130 5-5-5

ht/nb 2000 -> 2333
nb +0.33mV (1.2mV)

video 640 -> 700
mem 993 -> 1000

--------------------------------------------

WEI with stock x OC is here:

Show Us Your WEI

--------------------------------------------

memory latency stats is here:

CZ Platinum DDR2 1066 only runs at 800MHz
My System SpecsSystem Spec
08 Jan 2010   #227
skunksmash

SEVEN x64
 
 

not too great with the AMD OC's you may have to wait for someone running a phenom for a definitive answer, but that looks pretty good....:)

dont worry about your idle temps they're not that important.....& a 50c load out temp is VERY GOOD!! :), maybe you can squeeze it for 3.8ghz

if your ''prime stable'' for 8hrs+ then its safe to say the OC is solid.
My System SpecsSystem Spec
08 Jan 2010   #228
tranqueirex

dual: windows 7 Ultimate x64 7600 and XP SP3
 
 

Mr. Skunksmash, your answer is the assurance I was looking for since I am newbie in OC. but no need to worry. I am doing tests for over a month and as you can see temps are well monitored with minimum voltage increases. "wise man says... only fools rush in" - elvis' birthdays today!

there is no way to go further than 3.6GHz, my Motherboard is a regular standard cheapest M4a78 asus TDP 125V and the Vcore increases are too limited (+50, +100 and +150 only) and I just can't have a stable system with 3.7 using 212 x 17.5 (+150mV) even if I increase NB and chipset voltages - note: 212 is the limit I've found to push memories at 1130MHz keeping latency 5.

Based on Phenon's x3 OC's I saw in internet in most cases people don't push their HTs/NBs and memory frequencies just to achieve higher clock values, so that pops me another question:

If I let ht and memory in stocks (200 and 2000) I am supposing I can go further than 3.7 / 3.8GHz but is that settings will be better than the previous choice? I've also read there is no point to OC Phenoms without OC the North Bridge.

I really aprreciate your reply. thanks for your time.
My System SpecsSystem Spec
08 Jan 2010   #229
skunksmash

SEVEN x64
 
 

Quote   Quote: Originally Posted by tranqueirex View Post
Mr. Skunksmash, your answer is the assurance I was looking for since I am newbie in OC. but no need to worry. I am doing tests for over a month and as you can see temps are well monitored with minimum voltage increases. "wise man says... only fools rush in" - elvis' birthdays today!

there is no way to go further than 3.6GHz, my Motherboard is a regular standard cheapest M4a78 asus TDP 125V and the Vcore increases are too limited (+50, +100 and +150 only) and I just can't have a stable system with 3.7 using 212 x 17.5 (+150mV) even if I increase NB and chipset voltages - note: 212 is the limit I've found to push memories at 1130MHz keeping latency 5.

Based on Phenon's x3 OC's I saw in internet in most cases people don't push their HTs/NBs and memory frequencies just to achieve higher clock values, so that pops me another question:

If I let ht and memory in stocks (200 and 2000) I am supposing I can go further than 3.7 / 3.8GHz but is that settings will be better than the previous choice? I've also read there is no point to OC Phenoms without OC the North Bridge.

I really appreciate your reply. thanks for your time.
no worries mate, glad i could offer some assurance....

your overall CPU speed will gain you more than higher RAM bandwidth, so you might wanna look at loosening the RAM timings to CL6 & then further trying to bump up your overall OC..??

its all trial & error though my friend, even if i had matching H/W to yours here, i wouldn't be able to produce the same results...... each case is different. :)
My System SpecsSystem Spec
08 Jan 2010   #230
tranqueirex

dual: windows 7 Ultimate x64 7600 and XP SP3
 
 

Sure thing Mr. Skunksmash, I was enlightened:

I will simulate these two scenarios running a benchmark for each one just to figure out wich is better.

If you would kindly recommends me an effective benchmark software for that purpose I promisse to stop annoying you.

thanks again
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
Should I overclock my CPU?
Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
PC Custom Builds and Overclocking
odd post/bios screen, plus no keyboard detected @ post
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
General Discussion
Cant seem to get an overclock
Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:14.
Twitter Facebook Google+