Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

28 May 2010   #331
FCVPI99

Windows 7 Ultimate 64 bit
 
 

ok i found it it was called esit or something like that i found it late last night or i should say early this moring


My System SpecsSystem Spec
.
28 May 2010   #332
tw33k

Windows 7 Ultimate (x64) SP1
 
 

First round...

Post Your Overclock!-oc.png Post Your Overclock!-oc_2.png


My System SpecsSystem Spec
29 May 2010   #333
FCVPI99

Windows 7 Ultimate 64 bit
 
 

i have a question i did read the post on OC but im a little off i increase my bus from 333 to 370 which gave me 3.06 and its stable but it blue screened when doing the prime 95 so i droped it down to 340 and set PCIe to 100 it ran though about 30 minutes worth of prim 95 and everything was fine so i upped it again to 350 and im rerunning it i did look to set my PCi at 33 but i cant find that setting in my bios i have everything on auto except for my ram which i have set to 2.1V 5-5-5-15 to make it 1066 but its running at 11 something

is there anything else i need to know
My System SpecsSystem Spec
.

29 May 2010   #334
FCVPI99

Windows 7 Ultimate 64 bit
 
 

how long should you run prime 95?? i have been running for over an hour and a half and no falts yet
My System SpecsSystem Spec
31 May 2010   #335
hitman000

 

I found this when opening coretemp earlier on while playing with prime95, notice the clock speed. it was only on a second but i thought it was funny lol


Attached Thumbnails
Post Your Overclock!-coretempcrazy.jpg  
My System SpecsSystem Spec
31 May 2010   #336
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Quote   Quote: Originally Posted by hitman000 View Post
I found this when opening coretemp earlier on while playing with prime95, notice the clock speed. it was only on a second but i thought it was funny lol
Win!

I still cant figure out how to use Prime95...

~Lordbob
My System SpecsSystem Spec
31 May 2010   #337
smarteyeball

 
 

Quote   Quote: Originally Posted by Lordbob75 View Post
Quote   Quote: Originally Posted by hitman000 View Post
I found this when opening coretemp earlier on while playing with prime95, notice the clock speed. it was only on a second but i thought it was funny lol
Win!

I still cant figure out how to use Prime95...

~Lordbob
Copy files to folder, and run

Blend=Stress CPU and RAM

Small FFT to stress CPU

Large FFT to stress RAM

Advanced>round off error checking to show problems on the cores.

Sit back and watch temps and wait...
My System SpecsSystem Spec
31 May 2010   #338
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Quote   Quote: Originally Posted by smarteyeball View Post
Quote   Quote: Originally Posted by Lordbob75 View Post
Quote   Quote: Originally Posted by hitman000 View Post
I found this when opening coretemp earlier on while playing with prime95, notice the clock speed. it was only on a second but i thought it was funny lol
Win!

I still cant figure out how to use Prime95...

~Lordbob
Copy files to folder, and run

Blend=Stress CPU and RAM

Small FFT to stress CPU

Large FFT to stress RAM

Advanced>round off error checking to show problems on the cores.

Sit back and watch temps and wait...
Last time I ran the Small one it went BSoD.

~Lordbob
My System SpecsSystem Spec
31 May 2010   #339
smarteyeball

 
 

Quote   Quote: Originally Posted by Lordbob75 View Post
]
Last time I ran the Small one it went BSoD.

~Lordbob
sounds like too low vcore.



Quote   Quote: Originally Posted by FCVPI99 View Post
how long should you run prime 95?? i have been running for over an hour and a half and no falts yet

1hr = totally inadequate

8-12hr = very good

24hrs = great
My System SpecsSystem Spec
31 May 2010   #340
Lordbob75

Windows 7 Ultimate x64, Mint 9
 
 

Quote   Quote: Originally Posted by smarteyeball View Post
Quote   Quote: Originally Posted by Lordbob75 View Post
Last time I ran the Small one it went BSoD.

~Lordbob
sounds like too low vcore.
Elaborate?

~Lordbob
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:50.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App