Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

06 Jul 2010   #401
morrowmedia

Windows 7 Ultimate
 
 

I love the H50. I have the Corsair 800D case as well. I have 5 x 120mm fans (3 on top pulling hot air out, and 2 on the H50 rad for push/pull setup. It pulls cooler outside air into the case) and 2 x 140mm Fans (one on the hot swap tray and 1 in bottom section). The thing I love the most about the H50 is the lack of worry of a sealed unit plus the quite operation of the H50. It is a great setup. Very happy with corsair over these products! Fan for life now.


My System SpecsSystem Spec
.
06 Jul 2010   #402
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Thats a nice case, excellent cooling system :)
My System SpecsSystem Spec
11 Jul 2010   #403
EpicThorn

Windows 7 Ultimate 64 Bit
 
 

Well so far I have a minor OC.
What I have is the C2Q Q9450 (stock 2.6Ghz) running at 3.2Ghz
Kingston HyperX 1066Mhz running at stock with a FSBRAM of 3:4. Timings set at 5-5-5-15
Everything is stable, temps are fine
My next goal is to tighten the RAM timings a bit, then maybe OC the video card a little bit just to see what it is capable of.


Attached Thumbnails
Post Your Overclock!-desktoptemps.jpg  
My System SpecsSystem Spec
.

12 Jul 2010   #404
ionbasa

Windows 7 Ultimate SP1 x64
 
 

Check this out: Celron M 520


Attached Images
Post Your Overclock!-celron-m-520.jpg 
My System SpecsSystem Spec
13 Jul 2010   #405
blackroseMD1

Windows 10 Tech Preview 9926 x64
 
 

Decided to see how far I could go without bumping the voltage. Looks like I may have topped out here...


Attached Images
Post Your Overclock!-oc.png 
My System SpecsSystem Spec
13 Jul 2010   #406
win7clutz

Windows 7 Ultimate (64)
 
 

Quote   Quote: Originally Posted by blackroseMD1 View Post
Decided to see how far I could go without bumping the voltage. Looks like I may have topped out here...
Surely 1.344v isn't stock voltage.
My System SpecsSystem Spec
13 Jul 2010   #407
blackroseMD1

Windows 10 Tech Preview 9926 x64
 
 

Quote   Quote: Originally Posted by win7clutz View Post
Quote   Quote: Originally Posted by blackroseMD1 View Post
Decided to see how far I could go without bumping the voltage. Looks like I may have topped out here...
Surely 1.344v isn't stock voltage.
Haha, good point. I meant without me going in and changing any voltages manually. If the voltages were raised, then it did it on it's own. Best OC I've gotten so far, although temps are a little high. Idle is around 50c, load is between 75 and 80.
My System SpecsSystem Spec
13 Jul 2010   #408
win7clutz

Windows 7 Ultimate (64)
 
 

If you manually set the voltage you may find you can lower temps and maintain your OC at considerably lower VID.
My System SpecsSystem Spec
13 Jul 2010   #409
blackroseMD1

Windows 10 Tech Preview 9926 x64
 
 

Quote   Quote: Originally Posted by win7clutz View Post
If you manually set the voltage you may find you can lower temps and maintain your OC at considerably lower VID.
Yeah, I was looking at that in my BIOS, but it was pretty confusing. I've never messed with voltages when OCing before, so I don't want to go in and blow out my CPU because I made a dumb little error.

I was thinking about trying to raise the bclk and lower the multiplier instead. Not sure how that effects voltages though.
My System SpecsSystem Spec
14 Jul 2010   #410
win7clutz

Windows 7 Ultimate (64)
 
 

Not likely you will damage the chip by lowering the voltage. Changing the bclk and multiplier won't have any impact on the auto VID if the same clock speed is the result. The bios always over-compensates VID when OCing at "Auto" VID settings.

For instance, if I leave VID set to Auto, the bios runs voltage up to 1.375 to OC @ 4.0, yet if I set it manually it only requires 1.250 to achieve the same result 24/7 prime stable with a 12 degree reduction in temps.

I don't suggest you do anything you're not 100% comfortable with. Yet there's no reason to accept higher temps and excessive voltage that's not necessary to achieve the same result.


Attached Images
Post Your Overclock!-cpuz.png 
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
Should I overclock my CPU?
Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
PC Custom Builds and Overclocking
odd post/bios screen, plus no keyboard detected @ post
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
General Discussion
Cant seem to get an overclock
Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:04.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App