Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

23 May 2011   #671
jeepmann4x4

Windows 7 Ultimate 64bit
 
 

Quote   Quote: Originally Posted by paulpicks21 View Post
Quote   Quote: Originally Posted by jeepmann4x4 View Post
Quote   Quote: Originally Posted by paulpicks21 View Post
Thought I would test my cpu to find the "wall"

Seems to be 5.1ghz , which I might add is totally stable.

Requires alot of voltage though.

Frio does a great job keeping it cool at this speed and voltage , hit 82c after 10 mins of prime.

Nice, now I might have to give it a go....lol
Hi Jeepman , tbh I find it too dam easy to clock these new sandybridge cpu's its far too straight forward.

I think they all vary alot on what voltage they need to hit high overclocks , mine needs 1.36 iirc to be stable at 4.6ghz , 1.46 for 5ghz and 1.5 for 5.1ghz , its far too much voltage to be chucking at it for a 24/7 in my eyes , but certainly interesting to see how far they can go.

I read a review earlier where they achieved a 5.1ghz oc with 1.46v so like I say it certainly varies.

Shame I hit a wall at 5.1 , would post but couldn't get into windows at 5.2ghz no matter what.

All good fun till ya fry it lol.

As most people say , if you can't afford to replace it , don't do it. If you can then knock yourself out

Paul.
Ok well I gave it a go....I'll post a few pics,each will be a different OC.
Now I will first say that I was just trying to see at what OC speeds I could boot at and idle while watching temps, I did open some programs and play mp3's, open browsers. I ran IntelBurnTest on the first one at standard settings.

I AM BY NO MEANS CALLING THESE STABLE.

Still did not hit a wall for booting up and getting into Windows, I stopped at the last one because of the high volts.
I will fine tweak them at a later time to try for stable.




Attached Thumbnails
Post Your Overclock!-5.2-1.46test-1.png   Post Your Overclock!-5.3-1.464-test.png   Post Your Overclock!-5.4-1.48-test.png   Post Your Overclock!-5.5-1.50-test.png  
My System SpecsSystem Spec
.
24 May 2011   #672
kurahk7

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by jeepmann4x4 View Post
Quote   Quote: Originally Posted by paulpicks21 View Post
Quote   Quote: Originally Posted by jeepmann4x4 View Post


Nice, now I might have to give it a go....lol
Hi Jeepman , tbh I find it too dam easy to clock these new sandybridge cpu's its far too straight forward.

I think they all vary alot on what voltage they need to hit high overclocks , mine needs 1.36 iirc to be stable at 4.6ghz , 1.46 for 5ghz and 1.5 for 5.1ghz , its far too much voltage to be chucking at it for a 24/7 in my eyes , but certainly interesting to see how far they can go.

I read a review earlier where they achieved a 5.1ghz oc with 1.46v so like I say it certainly varies.

Shame I hit a wall at 5.1 , would post but couldn't get into windows at 5.2ghz no matter what.

All good fun till ya fry it lol.

As most people say , if you can't afford to replace it , don't do it. If you can then knock yourself out

Paul.
Ok well I gave it a go....I'll post a few pics,each will be a different OC.
Now I will first say that I was just trying to see at what OC speeds I could boot at and idle while watching temps, I did open some programs and play mp3's, open browsers. I ran IntelBurnTest on the first one at standard settings.

I AM BY NO MEANS CALLING THESE STABLE.

Still did not hit a wall for booting up and getting into Windows, I stopped at the last one because of the high volts.
I will fine tweak them at a later time to try for stable.
You spelled "were" wrong; you spelled it as "where" lol. Nice overclock I hope you can get 5.5ghz stable
My System SpecsSystem Spec
24 May 2011   #673
paulpicks21

Windows 7 Professional 64 bit
 
 

Wow Jeepman , thats some amazing results to get it to load at 5.5!

You must have a great chip there!
My System SpecsSystem Spec
.

24 May 2011   #674
jeepmann4x4

Windows 7 Ultimate 64bit
 
 

Quote   Quote: Originally Posted by kurahk7 View Post
Quote   Quote: Originally Posted by jeepmann4x4 View Post
Quote   Quote: Originally Posted by paulpicks21 View Post

Hi Jeepman , tbh I find it too dam easy to clock these new sandybridge cpu's its far too straight forward.

I think they all vary alot on what voltage they need to hit high overclocks , mine needs 1.36 iirc to be stable at 4.6ghz , 1.46 for 5ghz and 1.5 for 5.1ghz , its far too much voltage to be chucking at it for a 24/7 in my eyes , but certainly interesting to see how far they can go.

I read a review earlier where they achieved a 5.1ghz oc with 1.46v so like I say it certainly varies.

Shame I hit a wall at 5.1 , would post but couldn't get into windows at 5.2ghz no matter what.

All good fun till ya fry it lol.

As most people say , if you can't afford to replace it , don't do it. If you can then knock yourself out

Paul.
Ok well I gave it a go....I'll post a few pics,each will be a different OC.
Now I will first say that I was just trying to see at what OC speeds I could boot at and idle while watching temps, I did open some programs and play mp3's, open browsers. I ran IntelBurnTest on the first one at standard settings.

I AM BY NO MEANS CALLING THESE STABLE.

Still did not hit a wall for booting up and getting into Windows, I stopped at the last one because of the high volts.
I will fine tweak them at a later time to try for stable.
You spelled "were" wrong; you spelled it as "where" lol. Nice overclock I hope you can get 5.5ghz stable
No no no, It is spelled right the "H" is just silent

Yup I sure did spell "were" wrong.. I noticed it as I uploaded the pics but that was after I did all the testing and after I put it back to stock settings. I was not going to redo all of it. I figured I would just blame it on living in the mid-west.


Quote:
paulpicks21 Wow Jeepman , thats some amazing results to get it to load at 5.5!

You must have a great chip there!
Seems I got one of the "Golden Ones". I don't think I can get the 5.4 or 5.5 oc's stable with the high volts & temp it will take(imo). I just do not have the cooling for it right now.
Do you or anyone else know what the MAX temp & volts are for the I7-2600k? I searched but keep seeing different answers. I've seen from mid 80's to 100 (85c+-100c)
My System SpecsSystem Spec
24 May 2011   #675
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Here is the Intel spec sheet.

Intel® Core™ i7-2600K Processor

Tcase is 72.6°C, the CPU case add 5°C for the core temps (Tjunction) is 77.6°C.

That's the first Intel CPU spec sheet I've seen that didn't have a max CPU voltage listed.
My System SpecsSystem Spec
03 Jun 2011   #676
kellymac35

WINDOWS 7 Ultimate x64 Full
 
 

Been awhile since I have overclocked my rig stable @ 4 MHz


Attached Thumbnails
Post Your Overclock!-3dmark11.png  
Attached Images
Post Your Overclock!-cpu-z2.png 
My System SpecsSystem Spec
06 Jun 2011   #677
ionbasa

Windows 7 Ultimate SP1 x64
 
 

Laptop being repurposed as a Mincraft server.
Post Your Overclock!-capture.png
CPU-Z Validator 3.1


My System SpecsSystem Spec
09 Jun 2011   #678
Zen00

Windows 7 Ultimate x64
 
 

I totally loath all you Sandy Bridgers and your 5.0+ Ghz overclocks. :P

My CPU won't go over 3.8 Ghz before becoming unstable.
My System SpecsSystem Spec
06 Jul 2011   #679
kurahk7

Windows 7 Ultimate x64
 
 



Attached Thumbnails
Post Your Overclock!-3.6ghz.png  
My System SpecsSystem Spec
06 Jul 2011   #680
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Nice OC, looks good.
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
Should I overclock my CPU?
Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
PC Custom Builds and Overclocking
odd post/bios screen, plus no keyboard detected @ post
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
General Discussion
Cant seem to get an overclock
Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 02:28.
Twitter Facebook Google+