Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Post Your Overclock!

15 Mar 2009   #71

Windows 7 Ultimate 64bit Retail

I managed to get 3.74Ghz on 1.43v so I'm happy. Also boosted my memory to 1109Mhz.

My System SpecsSystem Spec
17 Mar 2009   #72

windows 7 build 7600 385x86

Hi i am new to this overclocking section is there a way to overclock a laptop it has a Intel 945 GMA chipset with core duo t2350 processor
My System SpecsSystem Spec
17 Mar 2009   #73

Windows 7 Ultimate Vista Ultimate x64

I think that it's probably not possible and you would have problems with heat if you did.
My System SpecsSystem Spec

17 Mar 2009   #74

windows 7 build 7600 385x86

ok thank you
My System SpecsSystem Spec
17 Mar 2009   #75

Windows 7 SP1 x64 build 7601.21701

Q9450 @3608mhz (8x451) @ 1.32V (LLC enabled) on air, so nothing special. If i would play around and would be willing to lower my memory i could get more probably, since my memory seems to hit some wall at around ~1080mhz, uping voltage or increasing timings doesnt help at all. But dont think its worth for ~100-200mhz. I managed to boot and do tests with over 4ghz, but with very high voltages and reduced memory speed.
My System SpecsSystem Spec
17 Mar 2009   #76

Windows 7 Enterprise SP1 x64 Windows 8 Enterprise RTM x64

Got may athlon xp 2600 to 2083mhz from 1913, but only after 7048, prevoius builds gave BSOD agter 2037mhz, can get it nearly 2.2ghz in win2k/xp though..
My System SpecsSystem Spec
23 Mar 2009   #77

Windows 7 Ultimate x64

Never been able to OC anything but the GPU on my laptop, but here's its overclock.

Post Your Overclock!-gpuz.png

For reference it's bandwidth is 5.5 GB/s before overclocking, 8.1GB/s after overclocking.

My System SpecsSystem Spec
23 Mar 2009   #78

Windows 7 7000 64bit

Ci7 920 running @ 3820Mhz
201x19 - 1.36v
3x2GB @ 1608Mhz 7-7-7-19
Stock Cooler

Not done yet. Got some tweaking left.
My System SpecsSystem Spec
24 Mar 2009   #79

Windows 7 x64

i7 920 @ 3.8

Post Your Overclock!-capture.png

My System SpecsSystem Spec
24 Mar 2009   #80

Windows 7 x64


I found massive decrease in heat (and could then reduce voltage) when I disabled HT and turbo mode. I was reluctant to do this, but once I did the gains were very impressive.

I have it @ 3.8 right now, but had 4.0 running but the temps were too high for my taste. 3.8 passes prime95 overnight.
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!

Thread Tools

Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - Finally hit 5GHz on air!
PC Custom Builds and Overclocking
Should I overclock my CPU?
Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
PC Custom Builds and Overclocking
odd post/bios screen, plus no keyboard detected @ post
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
General Discussion
Cant seem to get an overclock
Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
PC Custom Builds and Overclocking

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:08.
Twitter Facebook Google+