Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

06 Nov 2011   #861
smarteyeball

 
 

Quote   Quote: Originally Posted by Britton30 View Post
Thanks Patrick, indeed I bumped the Vcore to 1.575 and its using 1.522 and I have it running at 4.2 GHZ, if now I can make it stable. At these setting RAM is back up to 1600MHz which is stock, at 7-8-7-24T. This snip is with Photoshop X64 running.
Attachment 182477

You're welcome mate. Just double check that vcore doesn't exceed that chips max volt spec (don't know of the top of my head).

And Daves right, loosen the RAM and you might be able to lower that vcore. Then you can re-tighten timings.


Quote   Quote: Originally Posted by StalkeR View Post
Aham,thanks for the answer smartey !
No problem

I've also scrapped the 2011 build - just don't need the power. (And I got impatient )

Instead I'm just going with 1155. I just ordered a ASUS P8Z68 Deluxe Gen3 +2500K to play with until the ivy chip/revisions are released.


My System SpecsSystem Spec
.
07 Nov 2011   #862
StalkeR

Windows 10 Pro x64
 
 

Hello, it's me again. But now I have bigger cpu freq.

I have oc'd my cpu at 3.2GHz and also underclocked my ram for a bit. Thanks to Dave76 for the advice about that. Post Your Overclock!-untitled.png

Temps are good also again. I'm suprised about this...


My System SpecsSystem Spec
07 Nov 2011   #863
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Quote   Quote: Originally Posted by StalkeR View Post
Hello, it's me again. But now I have bigger cpu freq.

I have oc'd my cpu at 3.2GHz and also underclocked my ram for a bit. Thanks to Dave76 for the advice about that. Attachment 182659

Temps are good also again. I'm suprised about this...

Good job StalkeR. Very nice overclock.
My System SpecsSystem Spec
.

07 Nov 2011   #864
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

I'm running it at 3.9GHz and have it stalilized. I ran Prime for nearlt two hours and Intel burn on standard, high and very high and passed.
I raised the NB volts and lowered the CPU NB VID.
RAM is still stock at 1600MHz and 7-8-7.
Post Your Overclock!-stable.png


My System SpecsSystem Spec
07 Nov 2011   #865
Wishmaster

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by StalkeR View Post
Hello, it's me again. But now I have bigger cpu freq.

I have oc'd my cpu at 3.2GHz and also underclocked my ram for a bit. Thanks to Dave76 for the advice about that. Attachment 182659

Temps are good also again. I'm suprised about this...

Very nice!
I was pretty sure with a bit of time, 3.2Ghz wouldn't be that hard to get with that chip

Nice OC
My System SpecsSystem Spec
07 Nov 2011   #866
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

Quote   Quote: Originally Posted by Britton30 View Post
I'm running it at 3.9GHz and have it stalilized. I ran Prime for nearlt two hours and Intel burn on standard, high and very high and passed.
I raised the NB volts and lowered the CPU NB VID.
RAM is still stock at 1600MHz and 7-8-7.

Very nice OC. Glad it is stable. Good job.
My System SpecsSystem Spec
07 Nov 2011   #867
StalkeR

Windows 10 Pro x64
 
 

Quote   Quote: Originally Posted by essenbe View Post
Good job StalkeR. Very nice overclock.
Thanks Steve !

Quote   Quote: Originally Posted by Britton30 View Post
I'm running it at 3.9GHz and have it stalilized. I ran Prime for nearlt two hours and Intel burn on standard, high and very high and passed.
I raised the NB volts and lowered the CPU NB VID.
RAM is still stock at 1600MHz and 7-8-7.
Attachment 182705
Well done Britton !

Quote   Quote: Originally Posted by Wishmaster View Post
Very nice!
I was pretty sure with a bit of time, 3.2Ghz wouldn't be that hard to get with that chip

Nice OC
Thanks Wishmaster!
My System SpecsSystem Spec
07 Nov 2011   #868
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Thanks Steve and Boshko. Good job on your as well Boshko.
Now trying to get my RAM up to better speed. This is a slight improvement, but has been over 23,000 MB/s
Post Your Overclock!-winsat.png


My System SpecsSystem Spec
08 Nov 2011   #869
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

Quote   Quote: Originally Posted by StalkeR View Post
Hello, it's me again. But now I have bigger cpu freq.

I have oc'd my cpu at 3.2GHz and also underclocked my ram for a bit. Thanks to Dave76 for the advice about that. Attachment 182659

Temps are good also again. I'm suprised about this...
Glad to see you got it stable, it's not uncommon to have stability issues at XGHz and then be stable at X.2GHz, with lower temps.
Then sometimes you just hit a wall, and can't go beyond.

Enjoy your OC


Quote   Quote: Originally Posted by Britton30 View Post
Thanks Steve and Boshko. Good job on your as well Boshko.
Now trying to get my RAM up to better speed. This is a slight improvement, but has been over 23,000 MB/s
Attachment 182718
Nice OC, you might try tightening the RAM timings a little, see if it will run stable.
That should help.
My System SpecsSystem Spec
08 Nov 2011   #870
StalkeR

Windows 10 Pro x64
 
 

Thanks Dave !
My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:53.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App