Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Post Your Overclock!

08 Nov 2011   #871
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Quote   Quote: Originally Posted by Dave76 View Post

Quote   Quote: Originally Posted by Britton30 View Post
Thanks Steve and Boshko. Good job on your as well Boshko.
Now trying to get my RAM up to better speed. This is a slight improvement, but has been over 23,000 MB/s
Attachment 182718
Nice OC, you might try tightening the RAM timings a little, see if it will run stable.
That should help.
I have it at spec, 7-8-7-24T, at 9-9-9 it is much slower. Any tighter than a CL 7, it won't boot. I have hit a wall with the CPU, 4.3GHz, the FSB wall at 310.


My System SpecsSystem Spec
.
09 Nov 2011   #872
Dave76

Microsoft Community Contributor Award Recipient

Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
 
 

What is the RAM frequency with the FSB at 310?
You mentioned it was at 1600MHz, did you adjust it after the FSB bump?
What are the DRAM, NB, CPU/NB, voltages?
What is the 'Command Rate' set at?

Looks like you have 2X4GB and 2X2GB RAM installed, do they have the same specs?
Same brand and part numbers?
My System SpecsSystem Spec
09 Nov 2011   #873
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

My System SpecsSystem Spec
.

09 Nov 2011   #874
StalkeR

Windows 10 Pro x64
 
 

CPU Freq. is now a bit higher and RAM is almoust as stock freq. 808MHz.

Post Your Overclock!-ocd.png

After 5 min of quick test the temperatures/voltages.

Post Your Overclock!-1.png


My System SpecsSystem Spec
09 Nov 2011   #875
essenbe

Windows 10 Pro/ Windows 10 Pro Insider
 
 

Nice job Stalker. It looks like you have done a great job. Just for curiosity, look at your voltages, the +12V and +5V. If the +12V was correct you couldn't boot. It does the same on mine. Just wondering why.
My System SpecsSystem Spec
09 Nov 2011   #876
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Great Boshko! I get different votl readings in Core Temp than CPU-Z too. Must be where they are getting the readings from. Give Speccy a shot to see what it says. Speccy - System Information - Free Download
My System SpecsSystem Spec
10 Nov 2011   #877
StalkeR

Windows 10 Pro x64
 
 

Thanks guys ! I'll use CoreTemp and Speccy later, because I'm now on Linux and will give a shoot.

Edit:

I'm back now. I was running AIDA64 System Stability Test for 47 min and here are the results.

My System SpecsSystem Spec
11 Nov 2011   #878
Britton30
Microsoft MVP

Windows 7 Ultimate X64 SP1
 
 

Well done Bosko, and very low volts too.
My System SpecsSystem Spec
11 Nov 2011   #879
StalkeR

Windows 10 Pro x64
 
 

Thanks Britton ! And yes, volts are pretty good.
My System SpecsSystem Spec
15 Nov 2011   #880
StalkeR

Windows 10 Pro x64
 
 

Hey it's me again. I think that this is pretty good oc with stock cooling.

Post Your Overclock!-untitled.png

And after a quick AIDA Stress Test..

Post Your Overclock!-capture.png


My System SpecsSystem Spec
Closed Thread

 Post Your Overclock!




Thread Tools




Similar help and support threads
Thread Forum
Post Your Overclock! [2]
Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air!
PC Custom Builds and Overclocking
HELP ME i HAVE NEVER OVERCLOCK TELL ME HOW
Hello Sevenforums,I would like some other opinions on this subject please. Latley there have been many post showing up from people who have NEVER overclocked there processor wanting someone to give them step by step instructions to achieve this gole. I fully understand the excitment because it...
PC Custom Builds and Overclocking
Help me overclock!!
Hey, I'm trying to overclock my Computer in order to play Battlefield 3 at ultrahigh setting flawlessly, I barely got any overclocking experience, and when i overclock to 3.6ghz my computer crashed and turned off while playing battlefield 3. Apparently they told me i didnt overclock right and it...
PC Custom Builds and Overclocking
Could you help me overclock my cpu?
Hi guys. Before we start, i would like to thank you for your time and help :) So my system is: CPU - Intel Pentium 4 1.6a(northwood) FREQUENCY-1.6ghz; L2-CACHE-512kb; FRONT_SIDE_BUS-400 MT/s; MULTIPLIER-16x; VOLTAGE-1.475V; SOCKET-478 RAM - Kingston 2x512mb(total 1gb) DDR (one of them i think...
PC Custom Builds and Overclocking
overclock
i have a geforce 880GTX graphics card i overclocked the core clock from 592 mhz to 632mhz memory clock 921mhz to 1053 mhz i am wanting to know how can i know if overclocking it to this is ok is there any signs that tell you you've overclocked too much
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:35.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App