Post Your Overclock!

Page 88 of 190 FirstFirst ... 78868788899098188 ... LastLast

  1. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #871

    Dave76 said:

    Britton30 said:
    Thanks Steve and Boshko. Good job on your as well Boshko.
    Now trying to get my RAM up to better speed. This is a slight improvement, but has been over 23,000 MB/s
    Attachment 182718
    Nice OC, you might try tightening the RAM timings a little, see if it will run stable.
    That should help.
    I have it at spec, 7-8-7-24T, at 9-9-9 it is much slower. Any tighter than a CL 7, it won't boot. I have hit a wall with the CPU, 4.3GHz, the FSB wall at 310.
      My Computer


  2. Posts : 12,177
    Windows 7 Ult x64 - SP1/ Windows 8 Pro x64
       #872

    What is the RAM frequency with the FSB at 310?
    You mentioned it was at 1600MHz, did you adjust it after the FSB bump?
    What are the DRAM, NB, CPU/NB, voltages?
    What is the 'Command Rate' set at?

    Looks like you have 2X4GB and 2X2GB RAM installed, do they have the same specs?
    Same brand and part numbers?
      My Computer


  3. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #873
      My Computer


  4. Posts : 8,679
    Windows 10 Pro x64
       #874

    CPU Freq. is now a bit higher and RAM is almoust as stock freq. 808MHz.:)

    Post Your Overclock!-ocd.png

    After 5 min of quick test the temperatures/voltages.

    Post Your Overclock!-1.png
      My Computer


  5. Posts : 26,863
    Windows 11 Pro
       #875

    Nice job Stalker. It looks like you have done a great job. Just for curiosity, look at your voltages, the +12V and +5V. If the +12V was correct you couldn't boot. It does the same on mine. Just wondering why.
      My Computer


  6. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #876

    Great Boshko! I get different votl readings in Core Temp than CPU-Z too. Must be where they are getting the readings from. Give Speccy a shot to see what it says. Speccy - System Information - Free Download
      My Computer


  7. Posts : 8,679
    Windows 10 Pro x64
       #877

    Thanks guys ! I'll use CoreTemp and Speccy later, because I'm now on Linux and will give a shoot.

    Edit:

    I'm back now. I was running AIDA64 System Stability Test for 47 min and here are the results.

    Last edited by StalkeR; 10 Nov 2011 at 09:54.
      My Computer


  8. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #878

    Well done Bosko, and very low volts too.
      My Computer


  9. Posts : 8,679
    Windows 10 Pro x64
       #879

    Thanks Britton ! And yes, volts are pretty good.
      My Computer


  10. Posts : 8,679
    Windows 10 Pro x64
       #880

    Hey it's me again. I think that this is pretty good oc with stock cooling. :)

    Post Your Overclock!-untitled.png

    And after a quick AIDA Stress Test..

    Post Your Overclock!-capture.png
      My Computer


 
Page 88 of 190 FirstFirst ... 78868788899098188 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 00:14.
Find Us