Post Your Overclock!


  1. paulpicks21
    Posts : 6,075
    Windows 7 Professional 64 bit
       New #1571

    essenbe said:
    Paul, even the picture looks brighter on your Intel rig. The AMD one is rather dark and dreary.

    Lol, I think it was a problem with the way I used the snipper tool in windows 8 Steve, here's another run.

    Also best I got so far on winsat mem with the new ram is 29,500. Can't break the 30k barrier
    Attached Thumbnails Attached Thumbnails Post Your Overclock!-maxmem.png  
      My Computer

  3. Britton30
    Posts : 24,479
    Windows 7 Ultimate X64 SP1
       New #1572

    tw33k said:
    paulpicks21 said:
    This appears to be the best results I can get from my ram, it will clock higher but the results do not increase.

    It's a mild OC, but I managed to tighten the timings a little on top of the OC.

    Paul.
    Damn Intel guys and their high numbers...lol.
    YEAH! you tell 'em Mark.
      My Computer

  4. paulpicks21
    Posts : 6,075
    Windows 7 Professional 64 bit
       New #1573

    Britton30 said:
    tw33k said:
    paulpicks21 said:
    This appears to be the best results I can get from my ram, it will clock higher but the results do not increase.

    It's a mild OC, but I managed to tighten the timings a little on top of the OC.

    Paul.
    Damn Intel guys and their high numbers...lol.
    YEAH! you tell 'em Mark.

    Hey Gary I will have you know I am an Intel guy and an AMD guy!

    I just don't like my AMD rig much
      My Computer

  6. essenbe
    Posts : 26,869
    Windows 11 Pro
       New #1574

    I just wish AMD could build a board that works for Gary
      My Computer

  7. Britton30
    Posts : 24,479
    Windows 7 Ultimate X64 SP1
       New #1575

    paulpicks21 said:

    Hey Gary I will have you know I am an Intel guy and an AMD guy!

    I just don't like my AMD rig much
    essenbe said:
    I just wish AMD could build a board that works for Gary
    LOL. I agree to all the above! Guess I'll find out tomorrow.
      My Computer

  8. tw33k
    Posts : 3,028
    Windows 7 Ultimate (x64) SP1
       New #1576

    lol...fingers crossed
      My Computer

  10. Britton30
    Posts : 24,479
    Windows 7 Ultimate X64 SP1
       New #1577

    Wekk it's another pices of bull chips. My 1055T will at least boot...most of the time. I got a FX-6100 and it is crap with it. I have to reset or power off multiple times to get a boot. Many time I can't get to UEFI since the keyboard satys off till "Window is Starting".

    With the FX installed UEFI has some peculiar setting, example, NB Voltage has settings such as 18.4=13539MHz. WTH?
      My Computer

  11. Solarstarshines
    Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       New #1578

    Out of curiosity what board are you Use-ing
      My Computer

  12. ganjiry
    Posts : 3,118
    Win7 Home Premium x64 SP1
       New #1579

    im having issues with the fx6100 too. i havent even started to oc it yet as i cant get the f***in thing to stop bouncing between clock speeds. ive disabled C1E, C6, cool n quiet and core performance boost. boot into windows and it still switchin between 1.4, 2.4, 3.3 and 3.6Ghz. the only way i can get it to stop is by disabling turbo core control in amd overdrive but this has to be done everytime i restart. its drivin me nuts man. i have trawled through soooo many forums/threads and cant seem to find any other info

    i also found a few threads about 2 patches for win7 and fx cpu's and a windows hot fix but i have'nt tried either yet as there is so much mixed info.
    could anyine shed any light on this for us plz.
    thanks in advance folks
      My Computer

  13. Solarstarshines
    Posts : 7,466
    Windows 10 Home Premium 64bit sp1
       New #1580

    well my bios is different but what I did was

    Disable the Turbocore

    keep the c6 on it made no difference for me my voltages never changed

    I also have a FSB lock for some reason so i had no choice but to use the multiplyer

    If you have 1600mhz ram change it to xmp 1600 mhz ussually These chips downclock the ram to 1333mhz but when you OC it has to be churned up to 1600mhz before moving to the multiplyer

    I left my cool and quiet on auto

    Only real changes were the v-core multiplyer and ram mhz other then that FSB is kinda useless these chips don't like the FSB messed with

    Oh yea change the C6 to auto / I wish i had the same board it would be easy to show my Bios anyway I will look on info for Throtling on 6100 mine is a constant 24/7 all cores 4.4 Ghz
    of course 8120-30p though

    Ok this sticky generally says what im saying lol funny never thought i would be right on
    Anyway look at what they posted on the subject and the boards that are effected
    http://www.overclock.net/t/1202751/a...-please-sticky

    Mainly Asus Boards BTW
      My Computer

 

  Related Discussions
Post Your Overclock! [2]
in PC Custom Builds and Overclocking

Continued from - https://www.sevenforums.com/overclocking-case-mods/2309-post-your-overclock.html Finally hit 5GHz on air! 222537
Should I overclock my CPU?
in PC Custom Builds and Overclocking

Hello all, Recently my temps of my CPU have gone out of control, however, I disabled turbo mode in my bios and it works much better. Temps are less than 70c under full load My question is should I overclock this CPU I have? specs: CPU: Intel core i5 650 3.20GHz Mobo: Intel dq57tm
i had recently built a new computer. after installing windows 7 everything was fine, except for during start-up it'd say 'no keyboard deteced'. which it wasn't detecting it because i couldnt acess bios during this. once i came to the windows log in screen, it was then reading the keyboard. a...
Cant seem to get an overclock
in PC Custom Builds and Overclocking

Hi have an i7 2700k and an Asus P8H 61-M LE usb3 mobo and when i do a autotune overclock it says 4.0ghz and should set in the bios but it dosent,could anyone help me out on this one please Thanks
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

 © Designer Media Ltd
All times are GMT -5. The time now is 06:52.
Find Us