New
#1631
CPU-Z Validator 3.1
http://browse.geekbench.ca/geekbench2/619565
Did a new overclock with the ram and got it from 1866 to 2266.
I have way to much time on my hands!
CPU-Z Validator 3.1
http://browse.geekbench.ca/geekbench2/619565
Did a new overclock with the ram and got it from 1866 to 2266.
I have way to much time on my hands!
Beta, Amazing overclock on the ram! I bet that took some work
Gary, good start, it's just stretching it's legs at that speed lol. I would advise against turbo mode as it always tends to give more voltage than is actually needed. I expect 5.2ghz before the end of the day
If your cpu is anything like mine then once you have it all set up correctly it will run at 4.6ghz with a similar vcore to what you have right now on turbo.
Gonna send you a PM in a minute.
This is my overclock with the following settings:
All CPU features are enabled (Turbo boost, SpeedStep, C3, C6, C1E states)
CPU voltage is set to auto
Internal PLL overvoltage enabled
VTT 1.129V
VRAM 1.530V
All other voltages set to default
LLC is set to 1
CPU spread spectrum disabled
BLK set to 100
This is 24H prime and 3Dmark stable, max 78C. Note that because the CPU voltage is set to auto and Speedstep is enabled, the system is running idle or light task (internet browsing) at 1.6Ghz 0.975V.
Last edited by Ramon Zarat; 21 Apr 2012 at 21:06.