Post Your Overclock! [2]

  1. Posts : 4,198
    Windows 10 Pro

    Today I OC'd my CPU first time.. I used my mobo's official OC'ing software F-Stream and the stock speed of my i5 4670K is 3.4Ghz and it I ran on 4.4Ghz on Automatic Turbo settings.. anyways the temps went from 21c to 29c and the Cooler fan was running at 1800rpm and was a bit louder then it's normal 1400rpm sound. The windows was idle haven't benchmarked anything yet.
      My Computer

  2. Posts : 5,915
    Windows 10 Pro X64

    looking good boogieboy
      My Computer

  3. Posts : 26,869
    Windows 11 Pro

    Good job, boogieboy.
      My Computer

  4. Posts : 4,198
    Windows 10 Pro

      My Computer

  5. Posts : 6,075
    Windows 7 Professional 64 bit

    Not wanting to go against what Dude and Essenbe said but I don't think it's good until it's been stress tested.

    Idle temps are really nothing to go by at all and cannot give any indication of how hot it's going to get.

    I expect it will be fine but as most of us know, when you use the auto motherboard software it can often chuck a lot more voltage through the chip than is required and as a result generate a lot of heat under load.

    I would recommend testing it under load for a while, see what voltage it's running and how hot it is getting.

    Providing that's all good then job done :)
      My Computer

  6. Posts : 25,847
    Windows 10 Pro. 64/ version 1709 Windows 7 Pro/64

    I do agree the auto over clocking program in most cases will drive your volts way to high.
    That is the big reason I don't use such programs.
    When and if you do load test your system after using a over clock program be very careful because the volts and temps will clime very fast. You must be ready at all times during the test to shut down the test. Then let the system idle for a while to even the temps out to normal and then go into bios and change your settings. A over heated cpu will cool faster at idle than it will with the computer turned completely off if you have proper cooling.

    Note: If the temps don't come down at idle shut the computer down and check for a cooling problem.

    I also agree a over clock means nothing until it is tested under a load.

    I personally do load test at default first and monitor the temps and volts. That give me a good idea if my cooling is good enough to continue with over clocking and what volts are being used. It also gives me a base line of volts and temps.

    My over clock is not great but yet still very good for the volts I use while still staying cool.

    CPU Intel i7-4820-E @ 4.625/vcore 1.3V bios

    That is the balance one has to find. (The sweat spot)
      My Computer

  7. Posts : 600
    OpenBSD 6.8

    Overclocked my new build today from ~4000MHz to ~4300MHz and set my fans to 1700+ rpm.
    Post Your Overclock! [2]-overclockedcpu.png
    I should probably update my specs list too.
      My Computer

  8. Posts : 7,466
    Windows 10 Home Premium 64bit sp1

    My 4.6
    Attached Thumbnails Attached Thumbnails Post Your Overclock! [2]-cpup.png  
      My Computer

  9. Posts : 53,363
    Windows 10 Home x64

    A Guy
      My Computer

  10. Posts : 26,869
    Windows 11 Pro

    Solarstarshines said:
    My 4.6
    Tommy, is that voltage typical for the new CPUs at that clock speed?
      My Computer


  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 05:47.
Find Us