Post Your Overclock! [2]

Page 40 of 123 FirstFirst ... 30383940414250 ... LastLast

  1. Posts : 7,470
    Windows 10 Home Premium 64bit sp1
       #391

    Impressive if it works for you i would leave it but also 1.48 seems kinda high but if it is solid leave it

    and enjoy the fruits of your labor
      My Computer


  2. Posts : 3,118
    Win7 Home Premium x64 SP1
       #392

    Nice1 Bungee, You're a braver man than me, Fairplay though you got a nice oc

    llc has come in right handy although my board defaults llc to it's highest level so had to change that. I've not tried to oc my cpu without any llc but i reckon it would take a lot more patients than i have
      My Computer


  3. Posts : 26,468
    Windows 11 Pro
       #393

    Britton30 said:
    What a smart man (essenbe) told me is that he uses the ASUS AI suite to set some overclocks until he gets BSOD, then goes into BIOS and sets it to just below what caused it.
    Gary, all I use it for is to adjust voltage in AI Suite. I set it up in bios, but when stress testing I use AI to adjust voltages. When I find the right one, I go to bios and change it there. AI allows you to change it in windows, but does not change bios. You have to do that. I never use it for anything else other than monitoring.
      My Computer


  4. Posts : 3,118
    Win7 Home Premium x64 SP1
       #394

    essenbe said:
    I never use it for anything else other than monitoring.
    Do you get many false readings with AI suite? When i had Ai suite II installed i found it gave quite a few false readings for fan speeds and northbridge voltages among other things.
    Is it the newer version III for your board?
    It could be a really good monitoring software once all the little bugs are sorted enit.
      My Computer


  5. Posts : 537
    Windows 7 Ultimate x64 SP1
       #395

    Dropping to 4.4 for 24/7 use. 4.5 and beyond idles at too high a vcore (1.48 or more).
    Cinebench only drops from around 7.85 to 7.44. I can live with that...
    I can see a Sabertooth in my near future!
    Thanks for your comments and advice guys.
    Cheers,
    J
      My Computer


  6. Posts : 7,470
    Windows 10 Home Premium 64bit sp1
       #396

    ganjiry said:
    essenbe said:
    I never use it for anything else other than monitoring.
    Do you get many false readings with AI suite? When i had Ai suite II installed i found it gave quite a few false readings for fan speeds and northbridge voltages among other things.
    Is it the newer version III for your board?
    It could be a really good monitoring software once all the little bugs are sorted enit.

    To me it is dead on i use HW monitor and readings in the Bios to compare so far so good they been dead on
      My Computer


  7. Posts : 3,118
    Win7 Home Premium x64 SP1
       #397

    Nice 1, They must have worked some of the bugs out enit.
    I may give it a try again as i liked the probe part of it aswell as the fan control.
      My Computer


  8. Posts : 7,470
    Windows 10 Home Premium 64bit sp1
       #398

    Bungee18 said:
    Dropping to 4.4 for 24/7 use. 4.5 and beyond idles at too high a vcore (1.48 or more).
    Cinebench only drops from around 7.85 to 7.44. I can live with that...
    I can see a Sabertooth in my near future!
    Thanks for your comments and advice guys.
    Cheers,
    J
    your cinebench would be higher if you use the FSB @4.7 im hitting 8.10
      My Computer


  9. Posts : 3,118
    Win7 Home Premium x64 SP1
       #399

    Progress update.
    I don't usually have much patience when it comes to overclocking but its stopping me thinking about hospital by keeping my mind busy
    I've been testing different voltage's @ 4.4Ghz but got a stable 4.4Ghz, 200x 22, @1.428v, Drops to 1.416 @ load.
    cpu/nb 2400 @ 1.237v
    HT Link 2000 auto v
    cpu and cpu/nb llc set to high.
    Memory still stock xmp.
    Everything seemed stable untill it bsod while playing War Thunder.
    So i upped the cpu/ nb to 1.25v which improved stability aswell as increasing score's in everything i've tried so far.
    10 Passes IBT in 428.00, Max temp was 47c but settled @ 45c.
    Attached Thumbnails Attached Thumbnails Post Your Overclock! [2]-cpu-z-4.4ghz.png   Post Your Overclock! [2]-hwinfo.png   Post Your Overclock! [2]-winsat-mem-4.4ghz.png   Post Your Overclock! [2]-cinebench-cpu-4.4.png   Post Your Overclock! [2]-cinebench-open-gl-4.4.png  

      My Computer


  10. Posts : 24,479
    Windows 7 Ultimate X64 SP1
       #400

    Good job tommy and Ryan. you're going to make those AMDs squeal and say "Bob's your uncle".
      My Computer


 
Page 40 of 123 FirstFirst ... 30383940414250 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:02.
Find Us